monalisa terris - binary Options Trader - BITFX PROSIGNALS ...

Forex Signals Reddit: top providers review (part 1)

Forex Signals Reddit: top providers review (part 1)

Forex Signals - TOP Best Services. Checked!

To invest in the financial markets, we must acquire good tools that help us carry out our operations in the best possible way. In this sense, we always talk about the importance of brokers, however, signal systems must also be taken into account.
The platforms that offer signals to invest in forex provide us with alerts that will help us in a significant way to be able to carry out successful operations.
For this reason, we are going to tell you about the importance of these alerts in relation to the trading we carry out, because, without a doubt, this type of system will provide us with very good information to invest at the right time and in the best assets in the different markets. financial
Within this context, we will focus on Forex signals, since it is the most important market in the world, since in it, multiple transactions are carried out on a daily basis, hence the importance of having an alert system that offers us all the necessary data to invest in currencies.
Also, as we all already know, cryptocurrencies have become a very popular alternative to investing in traditional currencies. Therefore, some trading services/tools have emerged that help us to carry out successful operations in this particular market.
In the following points, we will detail everything you need to know to start operating in the financial markets using trading signals: what are signals, how do they work, because they are a very powerful help, etc. Let's go there!

What are Forex Trading Signals?

https://preview.redd.it/vjdnt1qrpny51.jpg?width=640&format=pjpg&auto=webp&s=bc541fc996701e5b4dd940abed610b59456a5625
Before explaining the importance of Forex signals, let's start by making a small note so that we know what exactly these alerts are.
Thus, we will know that the signals on the currency market are received by traders to know all the information that concerns Forex, both for assets and for the market itself.
These alerts allow us to know the movements that occur in the Forex market and the changes that occur in the different currency pairs. But the great advantage that this type of system gives us is that they provide us with the necessary information, to know when is the right time to carry out our investments.
In other words, through these signals, we will know the opportunities that are presented in the market and we will be able to carry out operations that can become quite profitable.
Profitability is precisely another of the fundamental aspects that must be taken into account when we talk about Forex signals since the vast majority of these alerts offer fairly reliable data on assets. Similarly, these signals can also provide us with recommendations or advice to make our operations more successful.

»Purpose: predict movements to carry out Profitable Operations

In short, Forex signal systems aim to predict the behavior that the different assets that are in the market will present and this is achieved thanks to new technologies, the creation of specialized software, and of course, the work of financial experts.
In addition, it must also be borne in mind that the reliability of these alerts largely lies in the fact that they are prepared by financial professionals. So they turn out to be a perfect tool so that our investments can bring us a greater number of benefits.

The best signal services today

We are going to tell you about the 3 main alert system services that we currently have on the market. There are many more, but I can assure these are not scams and are reliable. Of course, not 100% of trades will be a winner, so please make sure you apply proper money management and risk management system.

1. 1000pipbuilder (top choice)

Fast track your success and follow the high-performance Forex signals from 1000pip Builder. These Forex signals are rated 5 stars on Investing.com, so you can follow every signal with confidence. All signals are sent by a professional trader with over 10 years investment experience. This is a unique opportunity to see with your own eyes how a professional Forex trader trades the markets.
The 1000pip Builder Membership is ordinarily a signal service for Forex trading. You will get all the facts you need to successfully comply with the trading signals, set your stop loss and take earnings as well as additional techniques and techniques!
You will get easy to use trading indicators for Forex Trades, including your entry, stop loss and take profit. Overall, the earnings target per months is 350 Pips, depending on your funding this can be a high profit per month! (In fact, there is by no means a guarantee, but the past months had been all between 600 – 1000 Pips).
>>>Know more about 1000pipbuilder
Your 1000pip builder membership gives you all in hand you want to start trading Forex with success. Read the directions and wait for the first signals. You can trade them inside your demo account first, so you can take a look at the performance before you make investments real money!
Features:
  • Free Trial
  • Forex signals sent by email and SMS
  • Entry price, take profit and stop loss provided
  • Suitable for all time zones (signals sent over 24 hours)
  • MyFXBook verified performance
  • 10 years of investment experience
  • Target 300-400 pips per month
Pricing:
https://preview.redd.it/zjc10xx6ony51.png?width=668&format=png&auto=webp&s=9b0eac95f8b584dc0cdb62503e851d7036c0232b
VISIT 1000ipbuilder here

2. DDMarkets

Digital Derivatives Markets (DDMarkets) have been providing trade alert offerings since May 2014 - fully documenting their change ideas in an open and transparent manner.
September 2020 performance report for DD Markets.
Their manner is simple: carry out extensive research, share their evaluation and then deliver a trading sign when triggered. Once issued, daily updates on the trade are despatched to members via email.
It's essential to note that DDMarkets do not tolerate floating in an open drawdown in an effort to earnings at any cost - a common method used by less professional providers to 'fudge' performance statistics.
Verified Statistics: Not independently verified.
Price: plans from $74.40 per month.
Year Founded: 2014
Suitable for Beginners: Yes, (includes handy to follow trade analysis)
VISIT
-------

3. JKonFX

If you are looking or a forex signal service with a reliable (and profitable) music record you can't go previous Joel Kruger and the team at JKonFX.
Trading performance file for JKonFX.
Joel has delivered a reputable +59.18% journal performance for 2016, imparting real-time technical and fundamental insights, in an extremely obvious manner, to their 30,000+ subscriber base. Considered a low-frequency trader, alerts are only a small phase of the overall JKonFX subscription. If you're searching for hundreds of signals, you may want to consider other options.
Verified Statistics: Not independently verified.
Price: plans from $30 per month.
Year Founded: 2014
Suitable for Beginners: Yes, (includes convenient to follow videos updates).
VISIT

The importance of signals to invest in Forex

Once we have known what Forex signals are, we must comment on the importance of these alerts in relation to our operations.
As we have already told you in the previous paragraph, having a system of signals to be able to invest is quite advantageous, since, through these alerts, we will obtain quality information so that our operations end up being a true success.

»Use of signals for beginners and experts

In this sense, we have to say that one of the main advantages of Forex signals is that they can be used by both beginners and trading professionals.
As many as others can benefit from using a trading signal system because the more information and resources we have in our hands. The greater probability of success we will have. Let's see how beginners and experts can take advantage of alerts:
  • Beginners: for inexperienced these alerts become even more important since they will thus have an additional tool that will guide them to carry out all operations in the Forex market.
  • Professionals: In the same way, professionals are also recommended to make use of these alerts, so they have adequate information to continue bringing their investments to fruition.
Now that we know that both beginners and experts can use forex signals to invest, let's see what other advantages they have.

»Trading automation

When we dedicate ourselves to working in the financial world, none of us can spend 24 hours in front of the computer waiting to perform the perfect operation, it is impossible.
That is why Forex signals are important, because, in order to carry out our investments, all we will have to do is wait for those signals to arrive, be attentive to all the alerts we receive, and thus, operate at the right time according to the opportunities that have arisen.
It is fantastic to have a tool like this one that makes our work easier in this regard.

»Carry out profitable Forex operations

These signals are also important, because the vast majority of them are usually quite profitable, for this reason, we must get an alert system that provides us with accurate information so that our operations can bring us great benefits.
But in addition, these Forex signals have an added value and that is that they are very easy to understand, therefore, we will have a very useful tool at hand that will not be complicated and will end up being a very beneficial weapon for us.

»Decision support analysis

A system of currency market signals is also very important because it will help us to make our subsequent decisions.
We cannot forget that, to carry out any type of operation in this market, previously, we must meditate well and know the exact moment when we will know that our investments are going to bring us profits .
Therefore, all the information provided by these alerts will be a fantastic basis for future operations that we are going to carry out.

»Trading Signals made by professionals

Finally, we have to recall the idea that these signals are made by the best professionals. Financial experts who know perfectly how to analyze the movements that occur in the market and changes in prices.
Hence the importance of alerts, since they are very reliable and are presented as a necessary tool to operate in Forex and that our operations are as profitable as possible.

What should a signal provider be like?

https://preview.redd.it/j0ne51jypny51.png?width=640&format=png&auto=webp&s=5578ff4c42bd63d5b6950fc6401a5be94b97aa7f
As you have seen, Forex signal systems are really important for our operations to bring us many benefits. For this reason, at present, there are multiple platforms that offer us these financial services so that investing in currencies is very simple and fast.
Before telling you about the main services that we currently have available in the market, it is recommended that you know what are the main characteristics that a good signal provider should have, so that, at the time of your choice, you are clear that you have selected one of the best systems.

»Must send us information on the main currency pairs

In this sense, one of the first things we have to comment on is that a good signal provider, at a minimum, must send us alerts that offer us information about the 6 main currencies, in this case, we refer to the euro, dollar, The pound, the yen, the Swiss franc, and the Canadian dollar.
Of course, the data you provide us will be related to the pairs that make up all these currencies. Although we can also find systems that offer us information about other minorities, but as we have said, at a minimum, we must know these 6.

»Trading tools to operate better

Likewise, signal providers must also provide us with a large number of tools so that we can learn more about the Forex market.
We refer, for example, to technical analysis above all, which will help us to develop our own strategies to be able to operate in this market.
These analyzes are always prepared by professionals and study, mainly, the assets that we have available to invest.

»Different Forex signals reception channels

They must also make available to us different ways through which they will send us the Forex signals, the usual thing is that we can acquire them through the platform's website, or by a text message and even through our email.
In addition, it is recommended that the signal system we choose sends us a large number of alerts throughout the day, in order to have a wide range of possibilities.

»Free account and customer service

Other aspects that we must take into account to choose a good signal provider is whether we have the option of receiving, for a limited time, alerts for free or the profitability of the signals they emit to us.
Similarly, a final aspect that we must emphasize is that a good signal system must also have excellent customer service, which is available to us 24 hours a day and that we can contact them at through an email, a phone number, or a live chat, for greater immediacy.
Well, having said all this, in our last section we are going to tell you which are the best services currently on the market. That is, the most suitable Forex signal platforms to be able to work with them and carry out good operations. In this case, we will talk about ForexPro Signals, 365 Signals and Binary Signals.

Forex Signals Reddit: conclusion

To be able to invest properly in the Forex market, it is convenient that we get a signal system that provides us with all the necessary information about this market. It must be remembered that Forex is a very volatile market and therefore, many movements tend to occur quickly.
Asset prices can change in a matter of seconds, hence the importance of having a system that helps us analyze the market and thus know, what is the right time for us to start operating.
Therefore, although there are currently many signal systems that can offer us good services, the three that we have mentioned above are the ones that are best valued by users, which is why they are the best signal providers that we can choose to carry out. our investments.
Most of these alerts are quite profitable and in addition, these systems usually emit a large number of signals per day with full guarantees. For all this, SignalsForexPro, Signals365, or SignalsBinary are presented as fundamental tools so that we can obtain a greater number of benefits when we carry out our operations in the currency market.
submitted by kayakero to makemoneyforexreddit [link] [comments]

GE2020: The Roar of the Swing Voter

Hi everyone, this is my first ever post here.
I run a little website called The Thought Experiment where I talk about various issues, some of them Singapore related. And one of my main interests is Singaporean politics. With the GE2020 election results, I thought I should pen down my take on what us as the electorate were trying to say.
If you like what I wrote, I also wrote another article on the state of play for GE2020 during the campaigning period, as well as 2 other articles related to GE2015 back when it was taking place.
If you don't like what I wrote, that's ok! I think the beauty of freedom of expression is that everyone is entitled to their opinion. I'm always happy to get feedback, because I do think that more public discourse about our local politics helps us to be more politically aware as a whole.
Just thought I'll share my article here to see what you guys make of it :D
Article Starts Here:
During the campaigning period, both sides sought to portray an extreme scenario of what would happen if voters did not vote for them. The Peoples’ Action Party (PAP) warned that Singaporeans that their political opponents “might eventually replace the government after July 10”. Meanwhile, the Worker’s Party (WP) stated that “there was a real risk of a wipeout of elected opposition MPs at the July 10 polls”.
Today is July 11th. As we all know, neither of these scenarios came to pass. The PAP comfortably retained its super-majority in Parliament, winning 83 out of 93 elected MP seats. But just as in GE2011, another Group Representation Constituency (GRC) has fallen to the WP. In addition, the PAP saw its vote share drop drastically, down almost 9% to 61.2% from 69.9% in GE2015.
Singapore’s electorate is unique in that a significant proportion is comprised of swing voters: Voters who don’t hold any blind allegiance to any political party, but vote based on a variety of factors both micro and macro. The above extreme scenarios were clearly targeted at these swing voters. Well, the swing voters have made their choice, their roar sending 4 more elected opposition MPs into Parliament. This article aims to unpack that roar and what it means for the state of Singaporean politics going forward.
1. The PAP is still the preferred party to form Singapore’s Government
Yes, this may come across as blindingly obvious, but it still needs to be said. The swing voter is by its very definition, liable to changes of opinion. And a large factor that determines how a swing voter votes is their perception of how their fellow swing voters are voting. If swing voters perceive that most swing voters are leaning towards voting for the opposition, they might feel compelled to vote for the incumbent. And if the reverse is true, swing voters might feel the need to shore up opposition support.
Why is this so? This is because the swing voter is trying to push the vote result into a sweet spot – one that lies between the two extreme scenarios espoused by either side. They don’t want the PAP to sweep all 93 seats in a ‘white tsunami’. Neither do they want the opposition to claim so much territory that the PAP is too weak to form the Government on its own. But because each swing voter only has a binary choice: either they vote for one side or the other (I’m ignoring the third option where they simply spoil their vote), they can’t very well say “I want to vote 0.6 for the PAP and 0.4 for the Opposition with my vote”. And so we can expect the swing voter bloc to continue being a source of uncertainty for both sides in future elections, as long as swing voters are still convinced that the PAP should be the Government.
2. Voters no longer believe that the PAP needs a ‘strong mandate’ to govern. They also don’t buy into the NCMP scheme.
Throughout the campaign period, the PAP repeatedly exhorted voters to vote for them alone. Granted, they couldn’t very well give any ground to the opposition without a fight. And therefore there was an attempt to equate voting for the PAP as voting for Singapore’s best interests. However, the main message that voters got was this: PAP will only be able to steer Singapore out of the Covid-19 pandemic if it has a strong mandate from the people.
What is a strong mandate, you may ask? While no PAP candidate publicly confirmed it, their incessant harping on the Non-Constituency Member of Parliament (NCMP) scheme as the PAP’s win-win solution for having the PAP in power and a largely de-fanged opposition presence in parliament shows that the PAP truly wanted a parliament where it held every single seat.
Clearly, the electorate has different ideas, handing Sengkang GRC to the WP and slashing the PAP’s margins in previous strongholds such as West Coast, Choa Chu Kang and Tanjong Pagar by double digit percentages. There is no doubt from the results that swing voters are convinced that a PAP supermajority is not good for Singapore. They are no longer convinced that to vote for the opposition is a vote against Singapore. They have realized, as members of a maturing democracy surely must, that one can vote for the opposition, yet still be pro-Singapore.
3. Social Media and the Internet are rewriting the electorate’s perception.
In the past, there was no way to have an easily accessible record of historical events. With the only information source available being biased mainstream media, Singaporeans could only rely on that to fill in the gaps in their memories. Therefore, Operation Coldstore became a myth of the past, and Chee Soon Juan became a crackpot in the eyes of the people, someone who should never be allowed into Parliament.
Fast forward to today. Chee won 45.2% of the votes in Bukit Batok’s Single Member Constituency (SMC). His party-mate, Dr. Paul Tambyah did even better, winning 46.26% of the votes in Bukit Panjang SMC. For someone previously seen as unfit for public office, this is an extremely good result.
Chee has been running for elections in Singapore for a long time, and only now is there a significant change in the way he is perceived (and supported) by the electorate. Why? Because of social media and the internet, two things which the PAP does not have absolute control over. With the ability to conduct interviews with social media personalities as well as upload party videos on Youtube, he has been able to display a side of himself to people that the PAP did not want them to see: someone who is merely human just like them, but who is standing up for what he believes in.
4. Reserved Election Shenanigans and Tan Cheng Block: The electorate has not forgotten.
Tan Cheng Bock almost became our President in 2011. There are many who say that if Tan Kin Lian and Tan Jee Say had not run, Tony Tan would not have been elected. In March 2016, Tan Cheng Bock publicly declared his interest to run for the next Presidential Election that would be held in 2017. The close result of 2011 and Tan Cheng Bock’s imminent candidacy made the upcoming Presidential Election one that was eagerly anticipated.
That is, until the PAP shut down his bid for the presidency just a few months later in September 2016, using its supermajority in Parliament to pass a “reserved election” in which only members of a particular race could take part. Under the new rules that they had drawn up for themselves, it was decreed that only Malays could take part. And not just any Malay. The candidate had to either be a senior executive managing a firm that had S$500 million in shareholders’ equity, or be the Speaker of Parliament or a similarly high post in the public sector (the exact criteria are a bit more in-depth than this, but this is the gist of it. You can find the full criteria here). And who was the Speaker of Parliament at the time? Mdm Halimah, who was conveniently of the right race (Although there was some hooha about her actually being Indian). With the extremely strict private sector criteria and the PAP being able to effectively control who the public sector candidate was, it came as no surprise that Mdm Halimah was declared the only eligible candidate on Nomination Day. A day later, she was Singapore’s President. And all without a single vote cast by any Singaporean.
Of course, the PAP denied that this was a move specifically aimed at blocking Tan Cheng Bock’s bid for the presidency. Chan Chun Sing, Singapore’s current Minister of Trade and Industry, stated in 2017 that the Government was prepared to pay the political price over making these changes to the Constitution.
We can clearly see from the GE2020 results that a price was indeed paid. A loss of almost 9% of vote share is very significant, although a combination of the first-past-the-post rule and the GRC system ensured that the PAP still won 89.2% of the seats in Parliament despite only garnering 61.2% of the votes. On the whole, it’s naught but a scratch to the PAP’s overwhelming dominance in Parliament. The PAP still retains its supermajority and can make changes to the Constitution anytime that it likes. But the swing voters have sent a clear signal that they have not been persuaded by the PAP’s rationale.
5. Swing Voters do not want Racial Politics.
In 2019, Heng Swee Keat, Singapore’s Deputy Prime Minister and the man who is next in line to be Prime Minister (PM) commented that Singapore was not ready to have a non-Chinese PM. He further added that race is an issue that always arises at election-time in Singapore.
Let us now consider the GE2015 results. Tharman Shanmugaratnam, Singapore’s Senior Minister and someone whom many have expressed keenness to be Singapore’s next PM, obtained 79.28% of the vote share in Jurong GRC. This was above even the current Prime Minister Lee Hsien Loong, who scored 78.63% in Ang Mo Kio GRC. Tharman’s score was the highest in the entire election.
And now let us consider the GE2020 results. Tharman scored 74.62% in Jurong, again the highest scorer of the entire election, while Hsien Loong scored 71.91%. So Tharman beat the current PM again, and by an even bigger margin than the last time. Furthermore, Swee Keat, who made the infamous comments above, scored just 53.41% in East Coast.
Yes, I know I’m ignoring a lot of other factors that influenced these results. But don’t these results show conclusively that Heng’s comments were wrong? We have an Indian leading both the current and future PM in both elections, but yet PAP still feels the need to say that Singapore “hasn’t arrived” at a stage where we can vote without race in mind. In fact, this was the same rationale that supposedly led to the reserved presidency as mentioned in my earlier point.
The swing voters have spoken, and it is exceedingly clear to me that the electorate does not care what our highest office-holders are in terms of race, whether it be the PM or the President. Our Singapore pledge firmly states “regardless of race”, and I think the results have shown that we as a people have taken it to heart. But has the PAP?
6. Voters will not be so easily manipulated.
On one hand, Singaporeans were exhorted to stay home during the Covid-19 pandemic. Contact tracing became mandatory, and groups of more than 5 are prohibited.
But on the other hand, we are also told that it’s absolutely necessary to hold an election during this same period, for Singaporeans to wait in long lines and in close proximity to each other as we congregate to cast our vote, all because the PAP needs a strong mandate.
On one hand, Heng Swee Keat lambasted the Worker’s Party, claiming that it was “playing games with voters” over their refusal to confirm if they would accept NCMP seats.
But on the other hand, Heng Swee Keat was moved to the East Coast GRC at the eleventh hour in a surprise move to secure the constituency. (As mentioned above, he was aptly rewarded for this with a razor-thin margin of just 53.41% of the votes.)
On one hand, Masagos Zulkifli, PAP Vice-Chairman stated that “candidates should not be defined by a single moment in time or in their career, but judged instead by their growth throughout their life”. He said this in defense of Ivan Lim, who appears to be the very first candidate in Singaporean politics to have been pushed into retracting his candidacy by the power of non-mainstream media.
But on the other hand, the PAP called on the WP to make clear its stand on Raeesah Khan, a WP candidate who ran (and won) in Sengkang GRC for this election, stating that the Police investigation into Raeesah’s comments made on social media was “a serious matter which goes to the fundamental principles on which our country has been built”.
On one hand, Chan Chun Sing stated in 2015, referring to SingFirst’s policies about giving allowances to the young and the elderly, “Some of them promised you $300 per month. I say, please don’t insult my residents. You think…. they are here to be bribed?”
On the other hand, the PAP Government has just given out several handouts under its many budgets to help Singaporeans cope with the Covid-19 situation. [To be clear, I totally approve of these handouts. What I don’t approve is that the PAP felt the need to lambast similar policies as bribery in the past. Comparing a policy with a crime is a political low blow in my book.]
I could go on, but I think I’ve made my point. And so did the electorate in this election, putting their vote where it counted to show their disdain for the heavy-handedness and double standards that the PAP has displayed for this election.
Conclusion
I don’t say the above to put down the PAP. The PAP would have you believe that to not support them is equivalent to not wanting what’s best for Singapore. This is a false dichotomy that must be stamped out, and I am glad to see our swing voters taking a real stand with this election.
No, I say the above as a harsh but ultimately supportive letter to the PAP. As everyone can see from the results, we all still firmly believe that the PAP should be the Government. We still have faith that PAP has the leadership to take us forward and out of the Covid-19 crisis.
But we also want to send the PAP a strong signal with this vote, to bring them down from their ivory towers and down to the ground. Enough with the double standards. Enough with the heavy-handedness. Singaporeans have clearly stated their desire for a more mature democracy, and that means more alternative voices in Parliament. The PAP needs to stop acting as the father who knows it all, and to start acting as the bigger brother who can work hand in hand with his alternative younger brother towards what’s best for the entire family: Singapore.
There is a real chance that the PAP will not listen, though. As Lee Hsien Loong admitted in a rally in 2006, “if there are 10, 20… opposition members in Parliament… I have to spent my time thinking what is the right way to fix them”.
Now, the PAP has POFMA at its disposal. It still has the supermajority in Parliament, making them able to change any law in Singapore, even the Constitution at will. We have already seen them put these tools to use for its own benefit. Let us see if the PAP will continue as it has always done, or will it take this opportunity to change itself for the better. Whatever the case, we will be watching, and we will be waiting to make our roar heard once again five years down the road.
Majulah Singapura!
Article Ends Here.
Here's the link to the actual article:
https://thethoughtexperiment.org/2020/07/11/ge2020-the-roar-of-the-swing-vote
And here's the link to the other political articles I've written about Singapore:
https://thethoughtexperiment.org/2020/07/07/ge2020-the-state-of-play/
https://thethoughtexperiment.org/2015/09/10/ge2015-voting-wisely/
https://thethoughtexperiment.org/2015/09/05/expectations-of-the-opposition/
submitted by sharingan87 to singapore [link] [comments]

First Contact - Part Sixty-One (Kark)

[first] [prev] [next]
Captain's Personal Log - Stardate 8532.299
Arrived at Starbase-4973 with the Dakota and our crew. Turned over information to the local Starfleet representative as well as SUDS data for the other ship's crews. Spoke to Commodore Dunsten of Starfleet who requested a template for what changes the Dakota has undergone. Was counseled that my point totals will not count toward any ladder rankings due to 'extreme non-canon changes' to the Dakota as well as my crew personal armaments and shuttle modifications.
In shocking news, the Battlestar Fleet and the Cylon Collection have arrived. Talk about the big guns. Those guys carry the big Creation Engines that can pump out a Viper or Cylon fighters in roughly 10 seconds with only a 30 second cooldown/slushdown feature.
Met with the Space Force representative and turned over my battle logs. He, in particular, wanted the in-depth scans we performed on the various Precursor ships. Our practice of boarding the ships is, at this time, the most common strategy.
We discussed the fact that Space Force considers forcing the Precursor vessels out of the system to by a phyrric victory and that the system will require a heavy metal posting. Was also informed that the fact that the Precursor fleet retreated from the planets and then from the system was a 'statistical oddity' and he wanted more scans. He also inquired as to whether or not I ran an in-depth scan on the gas giants, which is where the Goliaths were spawning from. I regret I had not, merely a scan for a Goliath.
He appears quite concerned with the actions undertaken but did congratulate me on defending the system.
Transphasic Photon Torpedoes are considered standard armaments for all Starfleet vessels from here on out. There is talk of smaller planet-crackers being put in use among the crew, but planet crackers rely on the mantle to core interaction. Quantum torpedoes are nothing option that I am seriously considering. Phased plasma torpedoes are largely considered in the OP-Class of weaponry but I am seriously considering just loading everything up and going for broke. Tricobalt missiles might be another option but the last time anyone used that was during the Fifth Dominion War. The Dakota is so far out of specifications that mounting such weapons is not as far fetched as it may have sounded a month ago.
It isn't like anything we're going to do is going to count for the leaderboads.
On a personal note, some of the crew members have reported headaches from their SUDS interfaces. McCoy is working on it, but he also warned that the transporter may have to be reconfigured after the discovery that the Precursors can hijack the signal and capture crew members that way.
Starfleet transporters are much more carefully aligned than the earlier 'mat-trans' and 'teleporter' systems used by the 40K LARPers. Safety interlocks prevent our transporters from being used in many cases that a teleporter could be used, require more power, and have a triple-feedback redunancy check.
An amusing point: Teleporter systems seem to go straight through the shields. McCoy and Spock both believe that lengthened amount of time for buffer checking allows the Precursor shielding to be adjusted for the algorythm used by Starfleet vessels.
Another amusing point: During my LFG call, the Wesleys were lined up around the station core. Nobody is taking them on these, despite the class advantages because, outside of structured missions for Starfleet Games, nobody is going to suddenly have Wesley Weaknesses just because.
On a personal note: My Riker has grown out his beard and has been socializing with his Space Force peers in order to get us more information on this threat.'
--Picard 8873
Captain's Personal Log - Stardate 8532.304
One thing they don't mention in the sheer amount of time you spend moving from place to place. Warp drive is highly efficient and safe compared to stringdrive, slipstream, gates, and jumpspace. Unlike hyperspace, AI's are able to remain conscious in warp. Still, I feel the urge to yell "GO FASTER" at the warp nacelles.
My Spock took me to the side and warned me that Starfleet vessels may be making a serious mistake. Often, the Precursors take damage and flee the system, using Hellspace to jump out. He has noticed that after roughly 8% of their structure is damaged they then flee. He also had checked Starfleet records.
I'm the only vessel, at this time, running transphasic photon torpedoes.
He has suggested an experiment. Utilize transphasic torpedoes, phased plasma torpedoes, but leave one out of every barrage of 10, with the phased plasma torpedoes, with a subspace beacon. In that manner, we can discover where they are running off to.
My Spock has put forward the theory, and my Scotty and LaForge, as well as my Riker, all agree.
They have refitting, repair, and construction bases somewhere.
Perhaps our plan to put a phased subspace beacon aboard one of the larger vessels will pan out.
I do feel concern about what my crew and I might find in a Precursor shipyward.
--Picard 8873
Captain's Personal Log - Stardate 8532.306
We have returned to the system that myself and the others had cleared. In particular, we are running long range sensor scans of the gas giants. My Chekov has suggested, and I concur, that getting in close and running more detailed but shorter range scans might put us too close.
I would really like to avoid a barrage of nCv shells.
Our Uhura (She's extremely qualified and did not object to me doublechecking her bonafides) is keeping a careful ear out for any Precursor transmissions.
I have left orders that at the faintest whisper of Precursor code the Dakota is to move to red alert.
The system looks empty, but there is something that makes me think that there are only four lights.
--Picard 8873
ADDENDUM: There is apparently no structures or other masses in the gas giant at the depths our long range passive scanners can reach.
Captain's Personal Log - Stardate 8532.307
Our Uhura spotted it first. Subspace whispers. Complex and shifting binary, barely audible. While others suggested we move in, trying to get a lock in on what was whispering across subspace in such a manner I ordered the ship to immediately go to silent running, no emissions.
We observed a Goliath exit Hellspace near the larger gas giant, streaming vapor and metal, its attendant vessels exiting with it. As we watched it allowed the attendant vessels to board through the massive docking ports.
Sidenote: Some of those docking bays are the size of the real San Francisco Ultraplex.
The 'whispers' picked up and the massive Goliath sank into the gas giant.
My crew's estimation that the three initially engaged Goliaths of our last action had repaired themselves was confirmation bias.
For a bare moment the whisper got louder and the Goliath that had sunk into the gas giant was in plain view on our passive long range scanners then it simply vanished.
The belief of my Spock and Scotty is that the Precursors have some kind of shielded refit structure inside the gas giant beyond the scanner horizon. LaForge has stated that the pressures at such depth would make any construction or repairs inordinately difficult.
My Riker reminded LaForge that the Precursors were engaged in a war when they vanished and these bases are not only war-time bases, but that there are no living crews to worry about.
I ordered my crew to remain on silent running. There is enough debris on that planet to cover a probe approach. My LaForge has suggested putting a probe data relay in the Oort Cloud to give the signals a few 'bounces' and to use only phased tachyon streams with reversed polarity.
Sometimes I wish we didn't have all our own names for technology. Why could he have just said paired quark communications?
--Picard 8873
Captain's Personal Log - Stardate 8532.309
The probe was moved into place carefully, following a piece of debris from the previous battle. During this time our Uhura caught another scrap of what she has come to call "Precursor Whispers" from the other gas giant.
My Spock reminded me that the intense pressures inside a massive gas giant could make foundry work easier, allowing the creation of hyperalloys that we need massive foundries for to utilize the inherent pressures of a massive gas giant to create 'alloy farms' inside the gas giant.
A disturbing thought indeed.
Another ship type has arrived, which I have labeled the Enki class Precursor, has arrived and taken to carefully going over the debris fields of the Starfleet battle.
Thankfully the Klingon and Romulan officers routinely utilize anti-matter charges to clear any debris from the destruction of our ships.
It moved to the wreckage of the mining ship and has been spending time there. It is at extreme range and I am becoming nervous about what it is doing.
The Precursor attitudes within this star system are concerning.
Have you ever looked at an inanimate machine, with no living characterization like a Data possesses, and thought to yourself "What are you up to?" as you watched it?
I have that unique experience.
They are up to something.
--Picard 8873
Captain's Personal Log - Stardate 8532.310
The probe provided us with valuable information that is critical to disseminate.
We are now, to use my Riker's phrase: running like a bat out of hell.
Passive scans can only penetrate to a certain depth within a gas giant. Starfleet has been largely worried about planetary scans as well as deep space and intrasystem scans. Combine it with the fact we use a lot of gamification in our systems, gas giants were largely used as "spawn points" for crafts. This meant that, naturally, our scanners largely could not penetrate deeply into gas giants.
My Scotty and LaForge re-calibrated the sensor arrays to get a good look inside the gas giant.
My Spock was right. The Precursor was 'growing' large alloy fields down there. There was a repair and manufacturing base the size a continent down inside the gas giant with massive 'alloy farms' around it. Before the scale would have shocked me until my Spock pointed out that the Great Eye of Jupiter is twice the size of Terra itself. Nearly two dozen Precursor vessels were 'docked' at the facility.
Discussions on how to 'deal with' this massive repair and refit base were discussed at a closed meeting of my command crew. It ranged from using a Genesis Device on the gas giant (Not recommended. My LaForge stated that the Precursor ships we are facing here are more adept at 'learning' than previously encountered Precursor types and the last thing we should do is provide them with planet killers that create more resources) to attempting to use a modified planet cracker on the gas giant (Again, tabled due to concerns the Precursors would imitate it).
We settled on phasic trans-phasic photon torpedoes mixed with tricobat missiles.
Out attack was dual: Destroy the debris field of the Romulus class mining vessel, which was being thoroughly combed over by Enki class Precursor vessels, damage or perhaps even destroy the facility and the 'alloy farms' inside the gas giants.
We came in from above the stellar plane, at a high velocity angle. When facing Precursor vessels your speed and maneuverability are key to staying alive. We fired probes while still 25 million miles above the stellar plane. We came in with only debris shields at full power.
The probes reported back that while there were life signs on the planets in the Green and Amber zones the Precursor vessels around those planets and upon the surface were not engaged in wholesale slaughter or destruction. We practically turned the sensors inside out getting deep scans of everything.
Once in range (Starfleet weaponry is somewhat, to use my Riker's term: short legged compared to Space Force line weaponry) I ordered a full scan at maximum power and resolution. Normally this is avoided to prevent damage to sentient beings and xeno-species but the Precursors aren't a foe that one should concern themselves with scanner-burn.
Percursor vessels were not rising from the gas giants. While some immediately launched or moved to engage us from various points in the system, sheer distance and geometry prevented any attacks. At 30 million miles even nCv weapons or phaser beams move too slowly to engage a ship the size of the Dakota. We launched weapons and immediately began accelerating to be able to put enough distance between any Precursor vehicles and our own vessel.
We got our scan data back and immediately realized that engaging the Precursor vessels was now a secondary, if not tertiary, mission.
All four of the gas giants contained refit facilities of a size that is best described as 'geological'.
That was not the key data.
Our Uhura was able to isolate the 'Precursor Whisper' and while unable to decode it, was able to confirm what it is.
FTL data-streams.
Their battle, strategic, and tactical network.
The planets, while full of life and possessing several species known to be "Unified Civilized Races", were all at Stone Age technology. Precursor vessels were moving to protect the planets and their inhabitants for an unknown reason.
This information is vital to Starfleet, Space Force, and all other Confederacy organizations.
--Picard 8873
Captain's Personal Log - Stardate 8532.311
The Dakota has now had its very own AbramsKhan moment.
We were fired on in warp drive.
The Precursor vessel mounted one of the Galaxy class Starfleet vessel's engines and pursued us. With a lighter frame, higher energy output, and not having to concern itself with warp drive effects upon living beings, it was not only able to catch up to us, but fire upon us.
My Riker has stated that anyone who mocks up for having such thick armor after this will be starting a brawl.
We are alive only because of my insistence on heavy armor, structural integrity fields running the same type of shield frequency algorithms as our main deflector shields, with dual structural fields layered between armor and structural layers.
Immediately upon being fired upon we dropped out of warp drive to engage the small Precursor vessel. Chekov stated it would be between stellar bodies and it should have been a bare battlefield with not even gas wisps.
Instead, we dropped into a half dozen Jotun class vessels waiting for us.
We are currently undergoing evasive warp maneuvering as estimated by my Spock and my LaForge.
--Picard 8873
Captain's Personal Log - Stardate 8532.313
They're attempting to "drive" us deeper into the Dead Zone.
This gives us a fairly unusual opportunity. We can see what they are attempting to push us into or we can attempt to escape.
Spock and Scotty believe that it is imperative we discover what it is that the Precursors believe can take us out compared to the Jotuns following us.
Riker and LaForge maintain our goal should be reaching Federation/Confederate Space.
I believe I have a better idea.
--Picard 8873
Captain's Log - Stardate 8532.315
Rather than allow us to be pushed further into the Dead Zone I ordered the ship to move at a right angle to the galactic plane at full warp 9.3. While this can interfere with SUDS uploads and storage I have decided that the risk is necessary.
Captain's Log - Stardate 8532.317
The Precursor machines are still in close pursuit. They are arranging for attempted ambushes. LaForge has theorized that the one following us, which is a warp capable photon-torpedo launcher welded to the the Galaxy class engine and wrapped in neutronium armor, sends out a "whisper" as soon as it sees the 'warp flare' from our engines. That enables the Precursor vessels to Helljump to where we will be exiting.
Scotty has a plan.
Luckily, I did not dump my old class data, so I have a Kirk knowledge database.
Spock is overriding the interlocks to allow me to access that knowledge.
It is risky, but acceptable.
Captain's Log - Stardate 8532.317 - Supplmental
By utilizing the holodeck, a blank SUDS, and carefully aligned emitters, Spock believes I will be able to load the data from the Kirk character class into my memories despite being a Picard. He will attempt to use his Mind Meld ability to keep me from collapsing under a dual class.
The Precursor Pursuer will be in range inside of 30 minutes.
I have no choice.
Captain's Personal Log - Stardate 8532.317.7
The melding was somewhat successful. I have conflicting emotions and desires regarding many subjects but thankfully both my knowledge and personality templates are Starfleet officers. By use of the Mind Meld my Spock was able to use an older exploit involving class rank and player knowledge.
Contrary to popular opinion, Kirk classes are not womanizing hot-heads (Despite AbramsEra semi-canon) but rather highly innovative early Starfleet officers. It is just that the mission files force Kirk to use half-experimental technology in innovative ways in order to overcome unknown experiences and foes. One of the things often overlooked is Kirk made the rank of Admiral and was quite cautious in many ways.
Still, the dissonance between a Picard and a Kirk class is quite intense.
I am suffering nosebleeds. McCoy says it is from intercranial pressure as my brain attempts to sort through the information.
I have not informed him of the fact I have a severe SUDS hangover.
--Picark 8873
Captain's Log - Stardate 8532.318
After examining old scans of the Galaxy class ship that was defeated I was able to ascertain its hull number. Using that number, and knowledge possessed by an Admiral Level Kirk Class, when the Precursor Pursuer came close enough to fire I was able to drop its warp-shields. The Precursor Pursuer was exposed to raw warp energy at that time, inhibiting its ability to see the Dakota, specifically causing us to appear much further ahead in the warp conduit.
The Precursor Pursuer fell back and I ordered the Dakota to move to Emergency Warp Speed.
9.998 Okuda Scale
The Precursor Pursuer immediately went to maximum speed of the Galaxy class engine attached to little more than armor, bare shields, and a torpedo launcher.
Warp 10.
Without Transwarp shielding or any other technology, the Precursor Pursuer achieved infinite velocity and infinite mass.
The explosion damaged the Dakota and left us drifting in normal space.
Scotty and LaForce estimate repair times of 3 weeks.
--Picark 8873
Captain's Log - Stardate 8532.325
We are again underway after our successful destruction of the Precursor Pursuit vessel.
Maximum warp is limited to Warp 5.4.
Estimated time of arrival at Starbase 4973 is 11 days.
--Picark 8873
Captain's Personal Log - Stardate 8532.332
My SUDS has been scrambled and bad. I'm no longer Jeffery van Leedle, born on Rigel, but instead and curious combination of the character neural templates and my old personality.
Scotty, McCoy, and LaForge are examining me. Not in any hopes of untwining the personalities, but rather to forward the information to SoulNet in hopes that it can be prevented for occurring to others, no matter how unusual the circumstances.
The 'Gamed' memories no longer have the distinguishable overlay that Starfleet uses for safety measures. Instead, all of my memories feel the same.
Which is... confusing.
I remember racing a motorcycle in the wheat fields of Oklahoma, outside of Paris, under a Rigellian red sky.
My gestalt personality agrees that it is worth it for the information we have and to save my ship and my crew.
--Jeff Picark 8873
Captain's Log - Stardate 8532.334
Pro-term Acting Captain Riker-2173 commanding. Previous Captain suffering the effects of the SUDS/Template merger needed to access information to allow the destruction of the Precursor Pursuer.
Captain Jeff Picark was relieved of command, with acceptance and willingly, two hours ago.
Bridge and Command Officers are in agreement with this action.
We are two days out of Starbase 4973.
--Riker 2173
Captain's Personal Log - Stardate 8532.335
Would I have done it, knowing what I do now?
Yes.
My SUDS cannot update. The neural template recordings fragment and unravel.
I am no longer immortal.
But there is no such thing as only human. Humans, without the SUDS, accomplished incredible feats with just grit and determination.
However, I can no longer participate in active combat Starfleet games. Two hundred years of LARP down the tubes.
I made a good choice with my Riker. The hardest thing to do is relieve your Captain for cause.
He had good cause.
--Jeff Picark 8873
Captain's Log - Stardate 8532.336
I have docked the Dakota and am granting shore leave to crew. Captain Picark was taken to the Space Force infirmary via stretcher with McCoy in attendance.
Our mission is complete. Space Force has our data in their possession.
For some reason, the Precursors keep entire worlds of roughly half the xeno-sapients of the Unified Civilized Races.
Gas Giants must now be treated as Precursor base risks.
I am hoping "Jeff" recovers. The fact that he remembered an ancient piece of lore from OldTrekKhan is, honestly, impressive. Undergoing an in-mission partial respec was risky.
Will report to Starfleet and see what happens.
--Riker 2173
---------------------------
STARFLEET GAMING CENTRAL NOTICE
Jeffery van Leedle, player number 7c345a7e1-8873, is hereby promoted to Starfleet Admiral and is hereby recalled to Earth-42 to Starfleet Headquarters in New-SanFran.
In accordance to his wishes the Dakota a non-canon America class ship, is hereby given to Riker 56a817c38f2-2173, including all templates and player rewards.
-----NOTHING FOLLOWS-------
SPACE FORCE MEMO
ALL CAPTAINS
Initial estimations of 30-50 Goliath class total forces in is error.
New ship types encountered, new facilities discovered (See Attached File).
-----NOTHING FOLLOWS---------
CONFED MEMO
Mantid, any idea what this is about?
----NOTHING FOLLOWS-------
MANTID FREE WORLDS
Beyond "cattle worlds" we cannot estimate why Precursors, of all things, would have the older races, reduced to primitive, on worlds just being observed.
-----NOTHING FOLLOWS--------
BLACK CRUSADE
Experimentation, idiots. That Balor Hellship should have made you think of that.
They're trying to figure out a way to counter us.
------NOTHING FOLLOWS------
submitted by Ralts_Bloodthorne to HFY [link] [comments]

Cryptosoft Review 2020-Is it a Scam?

Cryptosoft Review 2020-Is it a Scam?

Most f the reviews we tend to have come back across reveal that the Cryptp soft platform is easy to
Their client service is very efficient. We did a live check and confirmed that they respond at intervals a moment. Moreover, they are available 24/7.
The Cryptp soft app is secure. They need all the mandatory measures in place to make sure data privacy.
The Cryptp soft System is considered by several among the most effective robots within the market nowadays. We have a tendency to realize this robot to perform virtually the same with Bitcoin Rush, another top bitcoin robot. Read the review of Bitcoin Rush for more data?
Cryptp soft registration method is straightforward, easy, and secure. You only want but 10 minutes to form an account and begin trading. Cryptp soft is a absolutely auto bot and is so accessible to everyone.

https://preview.redd.it/giu6kclgfnn51.jpg?width=1280&format=pjpg&auto=webp&s=f605d84ba2174f831ca825dbaffddf061b3a55b5
You do not want to perceive trading lingo to use Immediate Edge. The following steps can get you started with this robot.
STEP ONE: Fill the Signup type

Visit the Cryptp soft home page and register your name, phone number, and email in the provided kind. You will be asked to verify your phone variety via a text code and email through a link. CryptoVibes will ascertain that the Cryptp soft registration process is secure.

Their web site is SSL secured to confirm that hackers cannot steal personal information submitted through it. Cryptp soft cyber safety policy states that they're GDPR adherent. This suggests that they handle your knowledge with strict privacy.
STEP TWO: Get matched with a broker

The Cryptp soft Software then matches you with one in every of their partner brokers. The role of the broker is to receive deposits and facilitate transactions. We have a tendency to have determined that Cryptp soft only partners with regulated brokers.

With a regulated broker, they guarantee that your cash is safe. Reputable regulators such as the FCA, FSB, ASIC, and CySEC need brokers to segregate deposits and submit periodic reports on deposit usage.
You wold like a deposit of a minimum of $250 to trade with Immediate Edge. Do not confuse this quantity with the value of the robot. Cryptp soft does not need any license fee. The house owners of this robot build money by charging a small commission on the profits generated through the app
Deposits with Cryptp soft should be created through Wire Transfer, Visa, and MasterCard. It takes a few seconds for a deposit to reflect in an exceedingly trader’s account. Cryptp soft does not charge any deposit fees.
The Cryptp soft does provide a demo account to help traders familiarize themselves with its web-trader. CryptoVibes recommends that you are doing demo trading before going to live to trade. Please note that the demo is for demonstrative purposes solely.
The results you receive on the platform are primarily based on historical information and could therefore not mirror what you'll get in live trading.
The Cryptp soft live trader comes with features to help you outline the amount of risk you are willing to require per trade. You wish to go through the demo account to familiarize with these features. As mentioned severally in this review, you do not want specialized skills to use this robot.
Live trading with Cryptp soft involves determining the quantity of capital you plan to risk per trade and clicking the live button. Scan our review of Bitcoin Trader for one more straightforward to use the robot.
*Remember all trading risks and you shouldn’t risk more then you'll be able to afford to lose.
How to get the most out of Cryptp soft App
We have identified the following tips as paramount in guaranteeing that you make the most of Immediate Edge.
Begin with a deposit of $250 – Given the level of risk involved in trading with Immediate Edge, you should start with a tiny investment.
Follow crypto market news – You need to determine the type of reports that drives volatility high and capitalize on them. Cryptp soft claims to form the foremost profits throughout high market volatility.
Trade for eight hours per day – In keeping with Immediate Edge, trading for at least eight hours per day can help maximize profits. Cryptp soft is entirely auto, and hence you'll be able to leave the robot running as you continue together with your daily errands. You are doing not want more than twenty minutes per day to observe your account.
Close trading sessions at the tip of the day – Leaving open positions overnight is doubtless to translate to losses since the markets can change considerably overnight. It is better to shut sessions even if in the negative and start trading again the subsequent day. With a correct risk management strategy, there is no would like to fret concerning periodic losses.
Following our review we tend to realize Cryptp soft to be legit. But, traders ought to take additional caution, provided that this bot comes at a degree of risk. Whereas the app claims it's potential to form profits of up to 50percent per day, you'll be able to additionally lose the complete deposit inside seconds. This is often not sudden for a high-frequency trading robot.
We recommend that you just apply the required risk management measures. As a rule of thumb don't risk more than 10percent of your trading capital per trade. Also, never trade with an amount you cannot afford to lose. It is prudent to start small and add cash as you get conversant with the various features on the platform.
Recently, a brand new trading software was added to the bitcoin investment trade. This software is termed Cryptp soft and it is allegedly created by a corporation or organization called the International Council for Bitcoin.
There is additionally a letter out there on their web site that has been signed by someone named David. This person claims to own earned over 1,000,000 as a results of investing in bitcoins. What’s very shocking concerning this letter is that David claims to have earned that huge quantity in just one trade. If we have a tendency to place it in simple words, David became a millionaire overnight.
We tend to highly doubt that a trading system that has been launched recently will have such potential. To verify the main points of this software and to determine its legitimacy, we have a tendency to conducted our own research and investigation.
Cryptp soft is a bitcoin trading software that’s meant to assist newbie traders get involved in Cryptocurrency trading with less risk than ancient investment opportunities. Cryptp soft software was created by The International Council For Bitcoin who is PRO Bitcoin trader Group behind the Cryptp soft software. Notice out all concerning Cryptp soft software by The International Council For Bitcoin.
Cryptp soft Software may be a nice development by a famous, well established and experienced bitcoin trader Investors with a viewpoint to enable traders to perform different tasks with ease and convenience.

https://preview.redd.it/uuh85yghfnn51.png?width=1238&format=png&auto=webp&s=d0558e6e123114b6624d5a724b3b9b5983e717e1
Cryptp soft Software is essentially a Binary choices trading software that is designed to assist traders win and predict the Binary options trend of their respective choices. Cryptp soft APP works as a code to urge financial success, shows traders how they'll make money on-line, helps them to find different ways in which to induce huge returns on their investment. The Cryptp soft Trading Software additionally provides analyses of Market conditions so that traders will recognize what ought to be their next step. Cryptp soft System gives secret cryptocurrency ways that ultimately help binary traders to create thousands of greenbacks solely for some bucks.
Several individuals can say that Cryptocurrency Trading may be a risky business and tend to remain faraway from it. But from my expertise, high volatility means HIGH RETURN OF INVESTMENT in Crypto Market. But this can be where the Cryptp soft comes into play, the mathematical algorithm used by Cryptp soft Software takes the guesswork out choosing a winning profitable trade. You don’t must be an expert. Like I said earlier, I actually have personally tested the Cryptp soft and found the success rate is about ninety sevenpercent. I don’t apprehend concerning you, but a ninety seven% probability of earning a profitable trade is TERRIBLY GOOD! I’ve never come across something like this trading software before. Keep reading, below are my Cryptp soft results for the past week or so…
Watch over the Shoulder of a Professional Each Day and you'll be able to learn as you trade.
Averaging 97% Winning Weeks With Cryptp soft which suggests that more potential profits for you
Cryptp soft Software Are Fully Transparent
No previous experience with binary choices trading required
Web-based mostly, no need for downloads, additionally works on phones, tablets
You'll be able to Even Watch Cryptp soft Signals From Your Phone (iPhone Users — Photon Browser)
If you are ready to begin making cash online with an on the spot edge, there has never been a better chance than currently. If you enjoy surfing the web for countless hours trying for the next Trading Method Secrets, never being able to urge centered, being overloaded with conflicting information, and not creating cash on-line, you ought to probably leave this page right now and get back to that Cryptp soft System strategy
Cryptp soft bot could be a new cryptocurrency trading invention that comes with options that create this software stand out among others. It is conjointly an automatic trading platform that uses a smart program algorithm to detect favorable trading opportunities. It acts on its own or waits for a prompt command from the user depending on the software’s settings. But what makes this software unique and a favorite to individuals is what we have a tendency to shall unveil in this review.
There have been lots of unverified claims of how totally different cryptocurrency software have helped several people to make massive profits leading to Scam individuals. However, it's pertinent for cryptocurrency traders to verify if a particular trading software may be a scam or legit, which is also ?
After subjecting the features of the Cryptp soft bot software to a series of tests, the software isn't a scam however legit. The Cryptp soft bot is believed to have successful rate of 85%, that is a lot of than the 80percent benchmark for average software. The Cryptp soft bot has helped cryptocurrency traders to make sensible profits, which has been documented as testimonies on the software’s website.
Trading on the platform is straightforward and might not require experience. We had to verify the simplicity of the software, and we tend to discovered that the software is easy to navigate. The demo trading feature of the software makes it potential for brand new users to hold out trading activities in an exceedingly simulated atmosphere while not having to risk their investment. This any gives credence to the legitimacy of the software because it ensures that new users get accustomed to the features of the software before continuing to measure to trade
As earlier stated, the Cryptp soft bot could be a high-tech program software that comes with exceptional options that makes it among the simplest cryptocurrency trading software in the blockchain market. The outstanding features of the Cryptp soft bot embody the subsequent:
https://www.cryptoerapro.com/cryptosoft/

http://www.cryptoerapro.com/

https://twitter.com/cryptoerapro

https://www.instagram.com/cryptoerapro/

https://www.pinterest.co.uk/cryptoerapro/
submitted by cryptoerapro to u/cryptoerapro [link] [comments]

Comprehensive Guide for getting into Home Recording

I'm going to borrow from a few sources and do my best to make this cohesive, but this question comes up a lot. I thought we had a comprehensive guide, but it doesn't appear so. In the absence of this, I feel that a lot of you could use a simple place to go for some basics on recording. There are a couple of great resources online already on some drumming forums, but I don't think they will be around forever.
Some background on myself - I have been drumming a long time. During that time, home recording has gone from using a cassette deck to having a full blown studio at your finger tips. The technology in the last 15 years has gotten so good it really is incredible. When I was trying to decide what I wanted to do with my life, I decided to go to school for audio engineering in a world-class studio. During this time I had access to the studio and was able to assist with engineering on several projects. This was awesome, and I came out with a working knowledge of SIGNAL CHAIN, how audio works in the digital realm, how microphones work, studio design, etc. Can I answer your questions? Yes.

First up: Signal Chain! This is the basic building block of recording. Ever seen a "I have this plugged in but am getting no sound!" thread? Yeah, signal chain.

A "Signal Chain" is the path your audio follows, from sound source, to the recording device, and back out of your monitors (speakers to you normies).
A typical complete signal chain might go something like this:
1] instrument/sound source 2] Microphone/TransducePickup 3] Cable 4] Mic Preamp/DI Box 5] Analog-to-Digital Converter 6] Digital transmission medium[digital data get recoded for usb or FW transfer] 7] Digital recording Device 8] DSP and Digital summing/playback engine 9] Digital-to-Analog Converter 10] Analog output stage[line outputs and output gain/volume control] 11] Monitors/Playback device[headphones/other transducers]
Important Terms, Definitions, and explanations (this will be where the "core" information is):
1] AD Conversion: the process by which the electrical signal is "converted" to a stream of digital code[binary, 1 and 0]. This is accomplished, basically, by taking digital pictures of the audio...and this is known as the "sampling rate/frequency" The number of "pictures" determines the frequency. So the CD standard of 44.1k is 44,100 "pictures" per second of digital code that represents the electrical "wave" of audio. It should be noted that in order to reproduce a frequency accuratly, the sampling rate must be TWICE that of the desired frequency (See: Nyquist-Shannon Theorem). So, a 44.1 digital audio device can, in fact, only record frequencies as high as 22.05khz, and in the real world, the actual upper frequency limit is lower, because the AD device employs a LOW-PASS filter to protect the circuitry from distortion and digital errors called "ALIASING." Confused yet? Don't worry, there's more... We haven't even talked about Bit depth! There are 2 settings for recording digitally: Sample Rate and Bit Depth. Sample rate, as stated above, determines the frequencies captured, however bit depth is used to get a better picture of the sample. Higher bit depth = more accurate sound wave representation. More on this here. Generally speaking, I record at 92KHz/24 bit depth. This makes huge files, but gets really accurate audio. Why does it make huge files? Well, if you are sampling 92,000 times per second, you are taking each sample and applying 24 bits to that, multiply it out and you get 92,000*24 = 2,208,000 bits per second or roughly 0.26MB per second for ONE TRACK. If that track is 5 minutes long, that is a file that is 78.96MB in size. Now lets say you used 8 inputs on an interface, that is, in total, 631.7MB of data. Wow, that escalates quick, right? There is something else to note as well here: Your CPU has to calculate this. So the amount of calculations it needs to perform for this same scenario is ~17.7 million calculations PER SECOND. This is why CPU speed and RAM is super important when recording digitally.
2] DA conversion: the process by which the digital code (the computer representation of a sound wave) is transformed back into electrcal energy in the proper shape. In a oversimplified explanation, the code is measured and the output of the convertor reflects the value of the code by changing voltage. Think of a sound wave on a grid: Frequency would represent the X axis (the horizontal axis)... but there is a vertical axis too. This is called AMPLITUDE or how much energy the wave is generating. People refer to this as how 'loud' a sound is, but that's not entirely correct. You can have a high amplitude wave that is played at a quiet volume. It's important to distinguish the two. How loud a sound is can be controlled by the volume on a speaker or transducer. But that has no impact on how much amplitude the sound wave has in the digital space or "in the wire" on its way to the transducer. So don't get hung up on how "loud" a waveform is, it is how much amplitude it has when talking about it "in the box" or before it gets to the speakeheadphone/whatever.
3] Cables: An often overlooked expense and tool, cables can in fact, make or break your recording. The multitudes of types of cable are determined by the connector, the gauge(thickness), shielding, type of conductor, etc... Just some bullet points on cables:
- Always get the highest quality cabling you can afford. Low quality cables often employ shielding that doesnt efectively protect against AC hums(60 cycle hum), RF interference (causing your cable to act as a gigantic AM/CB radio antenna), or grounding noise introduced by other components in your system. - The way cables are coiled and treated can determine their lifespan and effectiveness. A kinked cable can mean a broken shield, again, causing noise problems. - The standard in the USA for wiring an XLR(standard microphone) cable is: PIN 1= Cold/-, PIN 2= Hot/+, PIN 3=Ground/shield. Pin 3 carries phantom power, so it is important that the shield of your cables be intact and in good condition if you want to use your mic cables without any problems. - Cables for LINE LEVEL and HI-Z(instrument level) gear are not the same! - Line Level Gear, weather professional or consumer, should generally be used with balanced cables (on a 1/4" connector, it will have 3 sections and is commonly known as TRS -or- TipRingSleeve). A balanced 1/4" is essentially the same as a microphone cable, and in fact, most Professional gear with balanced line inputs and outputs will have XLR connectors instead of 1/4" connectors. - Hi-Z cable for instruments (guitars, basses, keyboards, or anything with a pickup) is UNBALANCED, and should be so. The introduction of a balanced cable can cause electricity to be sent backwards into a guitar and shock the guitar player. You may want this to happen, but your gear doesn't. There is some danger here as well, especially on stage, where the voltage CAN BE LETHAL. When running a guitabass/keyboard "Direct" into your interface, soundcard, or recording device, you should ALWAYS use a "DIRECT BOX", which uses a transformer to isolate and balance the the signal or you can use any input on the interface designated as a "Instrument" or "Hi-Z" input. It also changes some electrical properties, resulting in a LINE LEVEL output (it amplifies it from instrument level to line level).
4] Digital Data Transmissions: This includes S/PDIF, AES/EBU, ADAT, MADI. I'm gonna give a brief overview of this stuff, since its unlikely that alot of you will ever really have to think about it: - SDPIF= Sony Phillips Digital Interface Format. using RCA or TOSLINK connectors, this is a digital protocol that carries 3 streams of information. Digital audio Left, Digital Audio Right, and CLOCK. SPDIF generally supports 48khz/20bit information, though some modern devices can support up to 24bits, and up to 88.2khz. SPDIF is the consumer format of AES/EBU - AES/EBU= Audio Engineering Society/European Breadcasters Union Digital protocol uses a special type of cable often terminated with XLR connectors to transmit 2 channels of Digital Audio. AES/EBU is found mostly on expensive professional digital gear. - ADAT= the Alesis Digital Audio Tape was introduced in 1991, and was the first casette based system capable of recording 8 channels of digital audio onto a single cartridge(a SUPER-VHS tape, same one used by high quality VCR's). Enough of the history, its not so important because we are talking about ADAT-LIGHTPIPE Protocol, which is a digital transmission protocol that uses fiberoptic cable and devices to send up to 8 channels of digital audio simultaneously and in sync. ADAT-Lightpipe supports up to 48khz sample rates. This is how people expand the number of inputs by chaining interfaces. - MADI is something you will almost never encounter. It is a protocol that allows up to 64 channels of digital audio to be transmitted over a single cable that is terminated by BNC connectors. Im just telling you it exists so in case you ever encounter a digital snake that doesnt use Gigabit Ethernet, you will know whats going on.
digital transmission specs: SPDIF -> clock->2Ch->RCA cable(consumer) ADAT-Lightpipe->clock->8Ch->Toslink(semi-pro) SPDIF-OPTICAL->clock->2Ch->Toslink(consumer) AES/EBU->clock->2Ch->XLR(Pro) TDIF->clock->8Ch->DSub(Semi-Pro) ______________ MADI->no clock->64Ch->BNC{rare except in large scale pofessional apps} SDIF-II->no clock->24Ch->DSub{rare!} AES/EBU-13->no clock->24Ch->DSub
5] MICROPHONES: There are many types of microphones, and several names for each type. The type of microphone doesn't equate to the polar pattern of the microphone. There are a few common polar patterns in microphones, but there are also several more that are less common. These are the main types- Omni-Directional, Figure 8 (bi-directional), Cardioid, Super Cardioid, Hyper Cardioid, Shotgun. Some light reading.... Now for the types of microphones: - Dynamic Microphones utilize polarized magnets to convert acoustical energy into electrical energy. there are 2 types of dynamic microphones: 1) Moving Coil microphones are the most common type of microphone made. They are also durable, and capable of handling VERY HIGH SPL (sound pressure levels). 2) Ribbon microphones are rare except in professional recording studios. Ribbon microphones are also incredibly fragile. NEVER EVER USE PHANTOM POWER WITH A RIBBON MICROPHONE, IT WILL DIE (unless it specifically requires it, but I've only ever seen this on one Ribbon microphone ever). Sometimes it might even smoke or shoot out a few sparks; applying phantom power to a Ribbon Microphone will literally cause the ribbon, which is normally made from Aluminum, to MELT. Also, windblasts and plosives can rip the ribbon, so these microphones are not suitible for things like horns, woodwinds, vocals, kick drums, or anything that "pushes air." There have been some advances in Ribbon microphones and they are getting to be more common, but they are still super fragile and you have to READ THE MANUAL CAREFULLY to avoid a $1k+ mistake. - CondenseCapacitor Microphones use an electrostatic charge to convert acoustical energy into electrical energy. The movement of the diaphragm(often metal coated mylar) toward a ceramic "backplate" causes a fluctuation in the charge, which is then amplified inside the microphone and output as an electrical signal. Condenser microphones usually use phantom power to charge the capacitors' and backplate in order to maintain the electrostatic charge. There are several types of condenser microphones: 1) Tube Condenser Microphones: historically, this type of microphone has been used in studios since the 1940s, and has been refined and redesigned hundreds, if not thousands of times. Some of the "best sounding" and most desired microphones EVER MADE are Tube Condenser microphones from the 50's and 60's. These vintage microphones, in good condition, with the original TUBES can sell for hundreds of thousands of dollars. Tube mics are known for sounding "full", "warm", and having a particular character, depending on the exact microphone. No 2 tubes mics, even of the same model, will sound the same. Similar, but not the same. Tube mics have their own power supplies, which are not interchangeable to different models. Each tube mic is a different design, and therefore, has different power requirements. 2) FET Condenser microphones: FET stands for "Field Effect Transistor" and the technology allowed condenser microphones to be miniturized. Take for example, the SHURE beta98s/d, which is a minicondenser microphone. FET technology is generally more transparant than tube technology, but can sometimes sound "harsh" or "sterile". 3) Electret Condenser Microphones are a condenser microphone that has a permanent charge, and therefore, does not require phantom power; however, the charge is not truly permanent, and these mics often use AA or 9V batteries, either inside the mic, or on a beltpack. These are less common.
Other important things to know about microphones:
- Pads, Rolloffs, etc: Some mics have switches or rotating collars that notate certain things. Most commonly, high pass filters/lowcut filters, or attenuation pads. 1) A HP/LC Filter does exactly what you might think: Removes low frequency content from the signal at a set frequency and slope. Some microphones allow you to switch the rolloff frequency. Common rolloff frequencies are 75hz, 80hz, 100hz, 120hz, 125hz, and 250hz. 2) A pad in this example is a switch that lowers the output of the microphone directly after the capsule to prevent overloading the input of a microphone preamplifier. You might be asking: How is that possible? Some microphones put out a VERY HIGH SIGNAL LEVEL, sometimes about line level(-10/+4dbu), mic level is generally accepted to start at -75dbu and continues increasing until it becomes line level in voltage. It should be noted that linel level signals are normally of a different impedance than mic level signals, which is determined by the gear. An example for this would be: I mic the top of a snare drum with a large diaphragm condenser mic (solid state mic, not tube) that is capable of handling very high SPLs (sound pressure levels). When the snare drum is played, the input of the mic preamp clips (distorts), even with the gain turned all the way down. To combat this, I would use a pad with enough attenuation to lower the signal into the proper range of input (-60db to -40 db). In general, it is accepted to use a pad with only as much attentuation as you need, plus a small margin of error for extra “headroom”. What this means is that if you use a 20db pad where you only need a 10db pad, you will then have to add an additional 10db of gain to achieve a desireable signal level. This can cause problems, as not all pads sound good, or even transparent, and can color and affect your signal in sometimes unwanted ways that are best left unamplified. - Other mic tips/info: 1) when recording vocals, you should always use a popfilter. A pop filter mounted on a gooseneck is generally more effective than a windscreen made of foam that slips over the microphone. The foam type often kill the highfrequency response, alter the polar pattern, and can introduce non-linear polarity problems(part of the frequency spectrum will be out of phase.) If you don't have a pop filter or don't want to spend on one, buy or obtain a hoop of some kind, buy some cheap panty-hose and stretch it over the hoop to build your own pop filter. 2) Terms Related to mics: - Plosives: “B”, “D”, “F”, “G”, “J”, “P”, “T” hard consonants and other vocal sounds that cause windblasts. These are responsible for a low frequency pop that can severly distort the diaphragm of the microphone, or cause a strange inconsistency of tonality by causing a short term proximity effect.
- Proximity effect: An exponential increase in low frequency response causes by having a microphone excessivly close to a sound. This can be cause by either the force of the air moving actually causes the microphone’s diaphragm to move and sometimes distort, usually on vocalists or buy the buildup of low frequency soundwaves due to off-axis cancellation ports. You cannot get proximity effect on an omnidirectional microphone. With some practice, you can use proximity effect to your advantage, or as an effect. For example, if you are recording someone whispering and it sounds thin or weak and irritating due to the intenese high mid and high frequency content, get the person very close to a cardioid microphone with two popfilters, back to back approx 1/2”-1” away from the mic and set your gain carefully, and you can achieve a very intimite recording of whispering. In a different scenario, you can place a mic inside of a kick drum between 1”-3” away from the inner shell, angled up and at the point of impact, and towards the floor tom. This usually captures a huge low end, and the sympathetic vibration of the floor tom on the kick drum hits, but retains a clarity of attack without being distorted by the SPL of the drum and without capturing unplesant low-mid resonation of the kick drum head and shell that is common directly in the middle of the shell.
6) Wave Envelope: The envelope is the graphical representation of a sound wave commonly found in a DAW. There are 4 parts to this: Attack, Decay, Sustain, Release: 1) Attack is how quickly the sound reaches its peak amplitude; 2) Decay is the time it takes to reach the sustain level; 3) Sustain how long a sound remains at a certain level (think of striking a tom, the initial smack is attack, then it decays to the resonance of the tom, how long it resonates is the sustain); 4) Release is the amount of time before the sustain stops. This is particularly important as these are also the settings on a common piece of gear called a Compressor! Understanding the envelope of a sound is key to learning how to maniuplate it.
7) Phase Cancellation: This is one of the most important concepts in home recording, especially when looking at drums. I'm putting it in this section because it matters so much. Phase Cancellation is what occurs when the same frequencies occur at different times. To put it simply, frequency amplitudes are additive - meaning if you have 2 sound waves of the same frequency, one amplitude is +4 and the other is +2, the way we percieve sound is that the frequency is +6. But a sound wave has a positive and negative amplitude as it travels (like a wave in the ocean with a peak and a swell). If the frequency then has two sources and it is 180 degrees out of phase, that means one wave is at +4 while the other is at -4. This sums to 0, or cancels out the wave. Effectively, you would hear silence. This is why micing techniques are so important, but we'll get into that later. I wanted this term at the top, and will likely mention it again.

Next we can look at the different types of options to actually record your sound!

1) Handheld/All in one/Field Recorders: I don't know if portable cassette tape recorders are still around, but that's an example of one. These are (or used to) be very popular with journalists because they were pretty decent at capturing speech. They do not fare too well with music though. Not too long ago, we saw the emergence of the digital field recorder. These are really nifty little devices. They come in many shapes, sizes and colors, and can be very affordable. They run on batteries, and have built-in microphones, and record digitally onto SD cards or harddiscs. The more simple ones have a pair of built-in condenser microphones, which may or may not be adjustable, and record onto an SD-card. They start around $99 (or less if you don't mind buying refurbished). You turn it on, record, connect the device itself or the SD card to your computer, transfer the file(s) and there is your recording! An entry-level example is the Tascam DR-05. It costs $99. It has two built in omni-directional mics, comes with a 2GB microSD card and runs on two AA batteries. It can record in different formats, the highest being 24-bit 96KHz Broadcast WAV, which is higher than DVD quality! You can also choose to record as an MP3 (32-320kbps) if you need to save space on the SD card or if you're simply going to record a speech/conference or upload it on the web later on. It's got a headphone jack and even small built-in speakers. It can be mounted onto a tripod. And it's about the size of a cell phone. The next step up (although there are of course many options that are price and feature-wise inbetween this one and the last) is a beefier device like the Zoom H4n. It's got all the same features as the Tascam DR-05 and more! It has two adjustable built-in cardioid condenser mics in an XY configuration (you can adjust the angle from a 90-120 degree spread). On the bottom of the device, there are two XLR inputs with preamps. With those, you can expand your recording possibilities with two external microphones. The preamps can send phantom power, so you can even use very nice studio mics. All 4 channels will be recorded independantly, so you can pop them onto your computer later and mix them with software. This device can also act as a USB interface, so instead of just using it as a field recorder, you can connect it directly to your computer or to a DSLR camera for HD filming. My new recommendation for this category is actually the Yamaha EAD10. It really is the best all-in-one solution for anyone that wants to record their kit audio with a great sound. It sports a kick drum trigger (mounts to the rim of the kick) with an x-y pattern set of microphones to pick up the rest of the kit sound. It also has on-board effects, lots of software integration options and smart features through its app. It really is a great solution for anyone who wants to record without reading this guide.
The TL;DR of this guide is - if it seems like too much, buy the Yamaha EAD10 as a simple but effective recording solution for your kit.

2) USB Microphones: There are actually mics that you an plug in directly to your computer via USB. The mics themselves are their own audio interfaces. These mics come in many shapes and sizes, and offer affordable solutions for basic home recording. You can record using a DAW or even something simple like the stock windows sound recorder program that's in the acessories folder of my Windows operating system. The Blue Snowflake is very affordable at $59. It can stand alone or you can attach it to your laptop or your flat screen monitor. It can record up to 44.1kHz, 16-bit WAV audio, which is CD quality. It's a condenser mic with a directional cardioid pickup pattern and has a full frequency response - from 35Hz-20kHz. It probably won't blow you away, but it's a big departure from your average built-in laptop, webcam, headset or desktop microphone. The Audio Technica AT2020 USB is a USB version of their popular AT2020 condenser microphone. At $100 it costs a little more than the regular version. The AT2020 is one of the finest mics in its price range. It's got a very clear sound and it can handle loud volumes. Other companies like Shure and Samson also offer USB versions of some of their studio mics. The AT2020 USB also records up to CD-quality audio and comes with a little desktop tripod. The MXL USB.009 mic is an all-out USB microphone. It features a 1 inch large-diaphragm condenser capsule and can record up to 24-bit 96kHz WAV audio. You can plug your headphones right into the mic (remember, it is its own audio interface) so you can monitor your recordings with no latency, as opposed to doing so with your computer. Switches on the mic control the gain and can blend the mic channel with playback audio. Cost: $399. If you already have a mic, or you don't want to be stuck with just a USB mic, you can purcase a USB converter for your existing microphone. Here is a great review of four of them.
3) Audio Recording Interfaces: You've done some reading up on this stuff... now you are lost. Welcome to the wide, wide world of Audio Interfaces. These come in all different shapes and sizes, features, sampling rates, bit depths, inputs, outputs, you name it. Welcome to the ocean, let's try to help you find land.
- An audio interface, as far as your computer is concerned, is an external sound card. It has audio inputs, such as a microphone preamp and outputs which connect to other audio devices or to headphones or speakers. The modern day recording "rig" is based around a computer, and to get the sound onto your computer, an interface is necessary. All computers have a sound card of some sort, but these have very low quality A/D Converters (analog to digital) and were not designed with any kind of sophisticated audio recording in mind, so for us they are useless and a dedicated audio interface must come into play.
- There are hundreds of interfaces out there. Most commonly they connect to a computer via USB or Firewire. There are also PCI and PCI Express-based interfaces for desktop computers. The most simple interfaces can record one channel via USB, while others can record up to 30 via firewire! All of the connection types into the computer have their advantages and drawbacks. The chances are, you are looking at USB, Firewire, or Thunderbolt. As far as speeds, most interfaces are in the same realm as far as speed is concerned but thunderbolt is a faster data transfer rate. There are some differences in terms of CPU load. Conflict handling (when packages collide) is handled differently. USB sends conflict resolution to the CPU, Firewire handles it internally, Thunderbolt, from what I could find, sends it to the CPU as well. For most applications, none of them are going to be superior from a home-recording standpoint. When you get up to 16/24 channels in/out simultaneously, it's going to matter a lot more.
- There are a number of things to consider when choosing an audio interface. First off your budget, number of channels you'd like to be able to record simultaneously, your monitoring system, your computer and operating system and your applications. Regarding budget, you have to get real. $500 is not going to get you a rig with the ability to multi-track a drum set covered in mics. Not even close! You might get an interface with 8 channels for that much, but you have to factor in the cost of everything, including mics, cables, stands, monitors/headphones, software, etc... Considerations: Stereo Recording or Multi-Track Recording? Stereo Recording is recording two tracks: A left and right channel, which reflects most audio playback systems. This doesn't necessarily mean you are simply recording with two mics, it means that what your rig is recording onto your computer is a single stereo track. You could be recording a 5-piece band with 16 mics/channels, but if you're recording in stereo, all you're getting is a summation of those 16 tracks. This means that in your recording software, you won't be able to manipulate any of those channels independantly after you recorded them. If the rack tom mic wasn't turned up loud enough, or you want to mute the guitars, you can't do that, because all you have is a stereo track of everything. It's up to you to get your levels and balance and tone right before you hit record. If you are only using two mics or lines, then you will have individual control over each mic/line after recording. Commonly, you can find 2 input interfaces and use a sub-mixer taking the left/right outputs and pluging those into each channel of the interface. Some mixers will output a stereo pair into a computer as an interface, such as the Allen&Heath ZED16. If you want full control over every single input, you need to multi-track. Each mic or line that you are recording with will get it's own track in your DAW software, which you can edit and process after the fact. This gives you a lot of control over a recording, and opens up many mixing options, and also many more issues. Interfaces that facilitate multitracking include Presonus FireStudio, Focusrite Scarlett interfaces, etc. There are some mixers that are also interfaces, such as the Presonus StudioLive 16, but these are very expensive. There are core-card interfaces as well, these will plug in directly to your motherboard via PCI or PCI-Express slots. Protools HD is a core-card interface and requires more hardware than just the card to work. I would recommend steering clear of these until you have a firm grasp of signal chain and digital audio, as there are more affordable solutions that will yield similar results in a home-environment.

DAW - Digital Audio Workstation

I've talked a lot about theory, hardware, signal chain, etc... but we need a way to interpret this data. First off what does a DAW do? Some refer to them as DAE's (Digital Audio Editors). You could call it a virtual mixing board , however that isn't entirely correct. DAWs allow you to record, control, mix and manipulate independant audio signals. You can change their volume, add effects, splice and dice tracks, combine recorded audio with MIDI-generated audio, record MIDI tracks and much much more. In the old days, when studios were based around large consoles, the actual audio needed to be recorded onto some kind of medium - analog tape. The audio signals passed through the boards, and were printed onto the tape, and the tape decks were used to play back the audio, and any cutting, overdubbing etc. had to be done physically on the tape. With a DAW, your audio is converted into 1's and 0's through the converters on your interface when you record, and so computers and their harddiscs have largely taken the place of reel-to-reel machines and analog tape.
Here is a list of commonly used DAWs in alphabetical order: ACID Pro Apple Logic Cakewalk SONAR Digital Performer FL (Fruity Loops) Studio (only versions 8 and higher can actually record Audio I believe) GarageBand PreSonus Studio One Pro Tools REAPER Propellerhead Reason (version 6 has combined Reason and Record into one software, so it now is a full audio DAW. Earlier versions of Reason are MIDI based and don't record audio) Propellerhead Record (see above) Steinberg Cubase Steinberg Nuendo
There are of course many more, but these are the main contenders. [Note that not all DAWs actually have audio recording capabilities (All the ones I listed do, because this thread is about audio recording), because many of them are designed for applications like MIDI composing, looping, etc. Some are relatively new, others have been around for a while, and have undergone many updates and transformations. Most have different versions, that cater to different types of recording communities, such as home recording/consumer or professional.
That's a whole lot of choices. You have to do a lot of research to understand what each one offers, what limitations they may have etc... Logic, Garageband and Digital Performer for instance are Mac-only. ACID Pro, FL Studio and SONAR will only run on Windows machines. Garageband is free and is even pre-installed on every Mac computer. Most other DAWs cost something.
Reaper is a standout. A non-commercial license only costs $60. Other DAWs often come bundled with interfaces, such as ProTools MP with M-Audio interfaces, Steinberg Cubase LE with Lexicon Interfaces, Studio One with Presonus Interfaces etc. Reaper is a full function, professional, affordable DAW with a tremendous community behind it. It's my recommendation for everyone, and comes with a free trial. It is universally compatible and not hardware-bound.
You of course don't have to purchase a bundle. Your research might yield that a particular interface will suit your needs well, but the software that the same company offers or even bundles isn't that hot. As a consumer you have a plethora of software and hardware manufacturers competing for your business and there is no shortage of choice. One thing to think about though is compatability and customer support. With some exceptions, technically you can run most DAWs with most interfaces. But again, don't just assume this, do your research! Also, some DAWs will run smoother on certain interfaces, and might experience problems on others. It's not a bad thing to assume that if you purchase the software and hardware from the same company, they're at least somewhat optimized for eachother. In fact, ProTools, until recently would only run on Digidesign (now AVID) and M-Audio interfaces. While many folks didn't like being limited to their hardware choices to run ProTools, a lot of users didn't mind, because I think that at least in part it made ProTools run smoother for everyone, and if you did have a problem, you only had to call up one company. There are many documented cases where consumers with software and hardware from different companies get the runaround:
Software Company X: "It's a hardware issue, call Hardware Company Z". Hardware Company Z: "It's a software issue, call Software Company X".
Another thing to research is the different versions of softwares. Many of them have different versions at different pricepoints, such as entry-level or student versions all the way up to versions catering to the pros. Cheaper versions come with limitations, whether it be a maximum number of audio tracks you can run simultaneously, plug-ins available or supported Plug-In formats and lack of other features that the upper versions have. Some Pro versions might require you to run certain kinds of hardware. I don't have time nor the will to do research on individual DAW's, so if any of you want to make a comparison of different versions of a specific DAW, be my guest! In the end, like I keep stressing - we each have to do our own research.
A big thing about the DAW that it is important to note is this: Your signal chain is your DAW. It is the digital representation of that chain and it is important to understand it in order to properly use that DAW. It is how you route the signal from one spot to another, how you move it through a sidechain compressor or bus the drums into the main fader. It is a digital representation of a large-format recording console, and if you don't understand how the signal gets from the sound source to your monitor (speaker), you're going to have a bad time.

Playback - Monitors are not just for looking at!

I've mentioned monitors several times and wanted to touch on these quickly: Monitors are whatever you are using to listen to the sound. These can be headphones, powered speakers, unpowered speakers, etc. The key thing here is that they are accurate. You want a good depth of field, you want as wide a frequency response as you can get, and you want NEARFIELD monitors. Unless you are working with a space that can put the monitor 8' away from you, 6" is really the biggest speaker size you need. At that point, nearfield monitors will reproduce the audio frequency range faithfully for you. There are many options here, closed back headphones, open back headphones, studio monitors powered, and unpowered (require a separate poweramp to drive the monitor). For headphones, I recommend AKG K271, K872, Sennheiser HD280 Pro, etc. There are many options, but if mixing on headphones I recommend spending some good money on a set. For Powered Monitors, there's really only one choice I recommend: Kali Audio LP-6 monitors. They are, dollar for dollar, the best monitors you can buy for a home studio, period. These things contend with Genelecs and cost a quarter of the price. Yes, they still cost a bit, but if you're going to invest, invest wisely. I don't recommend unpowered monitors, as if you skimp on the poweramp they lose all the advantages you gain with monitors. Just get the powered monitors if you are opting for not headphones.

Drum Mic'ing Guide, I'm not going to re-create the wheel.


That's all for now, this has taken some time to put together (a couple hourse now). I can answer other questions as they pop up. I used a few sources for the information, most notably some well-put together sections on the Pearl Drummers Forum in the recording section. I know a couple of the users are no longer active there, but if you see this and think "Hey, he ripped me off!", you're right, and thanks for allowing me to rip you off!

A couple other tips that I've come across for home recording:
You need to manage your gain/levels when recording. Digital is NOT analog! What does this mean? You should be PEAKING (the loudest the signal gets) around -12dB to -15dB on your meters. Any hotter than that and you are overdriving your digital signal processors.
What sound level should my master bus be at for Youtube?
Bass Traps 101
Sound Proofing 101
submitted by M3lllvar to drums [link] [comments]

LCD Arduino project Display Heart Rate

LCD Arduino project brief introduction
Some time ago, I found a heart rate sensor module MAX30100 in shopping online. This module can collect blood oxygen and heart rate data of users, which is also simple and convenient to use.
According to the data, I found that there are libraries of MAX30100 in the Arduino library files. That is to say, if I use the communication between LCD Arduino and MAX30100, I can directly call the Arduino library files without having to rewrite the driver files. This is a good thing, so I bought the module of MAX30100.
I decided to use Arduino to verify the heart rate and blood oxygen collection function of MAX30100. With STONE TFT LCD screen for monitoring blood pressure.
Note: this module by default only with 3.3 V level MCU communications, because it defaults to using IIC pin pull up the resistance of 4.7 K to 1.8 V, so there is no communication with the Arduino by default, if you want to commune with the Arduino and need two 4.7 K of the IIC pin pull-up resistor connected to the VIN pin, these contents will be introduced in the back of the chapter.

Functional assignments

Before starting this project, I thought about some simple features:
• Heart rate data and blood oxygen data were collected
• Heart rate and blood oxygen data are displayed through an LCD screen
These are the only two features, but if we want to implement it, we need to do more thinking:
• What master MCU is used?
• What kind of LCD display?
As we mentioned earlier, we use Arduino for the MCU, but this is an LCD Arduino project, so we need to choose the appropriate LCD display module. I plan to use the LCD display screen with a serial port. I have a STONE STVI070WT-01 displayer here, but if Arduino needs to communicate with it, MAX3232 is needed to do the level conversion.
Then the basic electronic materials are determined as follows:
  1. Arduino Mini Pro development board
  2. MAX30100 heart rate and blood oxygen sensor module
  3. STONE STVI070WT-01 LCD serial port display module
  4. MAX3232 module

Hardware Introduction

MAX30100

The MAX30100 is an integrated pulse oximetry and heart rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals. The MAX30100 operates from 1.8V and 3.3V power supplies and can be powered down through software with negligible standby current, permitting the power supply to remain connected at all times.

Applications

● Wearable Devices
● Fitness Assistant Devices
● Medical Monitoring Devices

Benefits and Features

1、Complete Pulse Oximeter and Heart-Rate SensorSolution Simplifies Design
• Integrated LEDs, Photo Sensor, and high-Performance Analog Front -End
• Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin OpticallyEnhanced System-in-Package
2、Ultra-Low-Power Operation Increases Battery Life for wearable Devices
• Programmable Sample Rate and LED Current for Power Savings
• Ultra-Low Shutdown Current (0.7µA, typ)
3、Advanced Functionality Improves Measurement Performance
• High SNR Provides Robust Motion Artifact Resilience
• Integrated Ambient Light Cancellation
• High Sample Rate Capability
• Fast Data Output Capability

Detection Principle


https://preview.redd.it/254ou0pq20a51.jpg?width=817&format=pjpg&auto=webp&s=2d3287e1973b328412e14c6e56f74e6f5975153e
Just press your finger against the sensor to estimate pulse oxygen saturation (SpO2) and pulse (equivalent to heartbeat).
The pulse oximeter (oximeter) is a mini-spectrometer that USES the principles of different red cell absorption spectra to analyze the oxygen saturation of the blood. This real-time and rapid measurement method is also widely used in many clinical references.
I will not introduce the MAX30100 too much, because these materials are available on the Internet. Interested friends can look up the information of this heart rate test module on the Internet, and have a deeper understanding of its detection principle.

Introduction to the STVI070WT-01 displayer

In this project, I will use the STONE STVI070WT-01 to display the heart rate and blood oxygen data.
The driver chip has been integrated inside the display screen, and there is software for users to use. Users only need to add buttons, text boxes, and other logic through the designed UI pictures, and then generate configuration files and download them into the display screen to run.
The display of STVI070WT-01 communicates with MCU through the UART RS232 signal, which means that we need to add a MAX3232 chip to convert the RS232 signal into a TTL signal so that we can communicate with Arduino MCU.

https://preview.redd.it/kyyv3hou20a51.jpg?width=749&format=pjpg&auto=webp&s=512b7285eb763e518a85d0b172dabc08b15cab6a
If you are not sure how to use the MAX3232, please refer to the following pictures:

https://preview.redd.it/5laiqsxw20a51.jpg?width=653&format=pjpg&auto=webp&s=126fb57d5171d942046277896e1552995df0ce13
If you think the level conversion is too troublesome, you can choose other types of displayers of STONE Tech, some of which can directly output uart-TTL signal.
The official website has detailed information and introduction:
https://www.stoneitech.com/
If you need video tutorials and tutorials to use, you can also find it on the official website.

https://preview.redd.it/0rkfwxk530a51.jpg?width=867&format=pjpg&auto=webp&s=32803906927fff48bb8fbc1b0a7c073cfe54c5e5

Development steps

Three steps of STONE display screen development:
• Design the display logic and button logic with STONE TOOL software, and download the design file to the display module.
• MCU communicates with the STONE LCD display module through the serial port.
• With the data obtained in step 2, the MCU does other actions.

STONE TOOL software installation

Download the latest version of the STONE TOOL software (currently TOOL2019) from the website, and install it.
After the software is installed, the following interface will be opened:

https://preview.redd.it/evuct2w630a51.jpg?width=848&format=pjpg&auto=webp&s=201d40fdb81e2c4fd229992daf15501f2cb177a0
Click the "File" button in the upper left corner to create a new project, which we will discuss later.

LCD Arduino

Arduino is an open-source electronic prototype platform that is easy to use and easy to use. It includes the hardware part (various development boards that conform to the Arduino specification) and the software part (Arduino IDE and related development kits).
The hardware part (or development board) consists of a microcontroller (MCU), Flash memory (Flash), and a set of universal input/output interfaces (GPIO), which you can think of as a microcomputer motherboard.
The software part is mainly composed of Arduino IDE on PC, related board-level support package (BSP) and rich third-party function library. With the Arduino IDE, you can easily download the BSP associated with your development board and the libraries you need to write your programs.
Arduino is an open-source platform. So far, there have been many models and many derived controllers, including Arduino Uno, Arduino Nano, Arduino Yun and so on. In addition, the Arduino IDE now not only supports the Arduino series development boards but also adds support for popular development boards such as Intel Galileo and NodeMCU by introducing BSP.
Arduino senses the environment through a variety of sensors, controlling lights, motors and other devices to feedback and influence the environment. The microcontroller on the board can be programmed with an Arduino programming language, compiled into binaries, and burned into the microcontroller. Programming for Arduino is implemented with the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). Arduino-based projects can contain Arduino only, as well as Arduino and other software running on PC, and they communicate with each other (such as Flash, Processing, MaxMSP).

HMI for Arduino serial display TFT LCD project development environment

The Arduino development environment is the Arduino IDE, which can be downloaded from the Internet.
Log into the official website of Arduino and download the software
https://www.arduino.cc/en/Main/Software?setlang=cn
After installing the Arduino IDE, the following interface will appear when you open the software:

https://preview.redd.it/2ajmkke830a51.jpg?width=567&format=pjpg&auto=webp&s=56dc9dd01c98b231c782ef94d24a9f620c4897b3
The Arduino IDE creates two functions by default: the setup function and the loop function.
There are many Arduino introductions on the Internet. If you don't understand something, you can go to the Internet to find it.

LCD Arduino Project implementation process

hardware connection

To ensure that the next step in writing code goes smoothly, we must first determine the reliability of the hardware connection.
Only four pieces of hardware were used in this project:
  1. Arduino Mini pro-development board
  2. STONE STVI070WT-01 TFT-LCD display screen
  3. MAX30100 heart rate and blood oxygen sensor
  4. MAX3232 (rs232-> TTL)
The Arduino Mini Pro development board and STVI070WT-01 TFT-LCD display screen are connected through UART, which requires level conversion through MAX3232, and then the Arduino Mini Pro development board and MAX30100 module are connected through IIC interface. After thinking clearly, we can draw the following wiring picture:

https://preview.redd.it/w2e5c9ha30a51.jpg?width=769&format=pjpg&auto=webp&s=95129db838d6c358e986c88a4d1348f4783cd0ab
https://preview.redd.it/eom4wiia30a51.jpg?width=1091&format=pjpg&auto=webp&s=ff56c3afaf063d7785a5b85ba283532be0dd896e
Make sure there are no errors in the hardware connection and proceed to the next step.

STONE TFT LCD user interface design

First of all, we need to design a UI display image, which can be designed by PhotoShop or other image design tools. After designing the UI display image, save the image in JPG format.
Open the software STONE TOOL 2019 and create a new project:

https://preview.redd.it/sqjii2mc30a51.jpg?width=1004&format=pjpg&auto=webp&s=12f0a87d6c2ca8decaff241d5a0b50a3a1aece89
https://preview.redd.it/4ta8cdlc30a51.jpg?width=871&format=pjpg&auto=webp&s=b31ac5e612a2c809e29f63974a04ba25bff83788
Remove the image that was loaded by default in the new project, and add the UI image that we designed.
Add the text display component, design the display digit and decimal point, get the storage location of the text display component in the displayer.
The effect is as follows:

https://preview.redd.it/2mfqapoe30a51.jpg?width=1335&format=pjpg&auto=webp&s=aacfa0fde88defacd127ea9d9d27ab006ab618dd
Text display component address:
• Connection sta : 0x0008
• Heart rate : 0x0001
• Blood oxygen : 0x0005
The main contents of the UI interface are as follows:
• Connection status
• Heart rate display
• Blood oxygen showed

Generate configuration file

Once the UI design is complete, the configuration file can be generated and downloaded to the STVI070WT-01 displaye.

First, perform step 1, then insert the USB flash drive into the computer, and the disk symbol will be displayed. Then click "Download to u-disk" to Download the configuration file to the USB flash drive, and then insert the USB flash drive into STVI070WT-01 to complete the upgrade.

MAX30100

MAX30100 communicates via IIC. Its working principle is that the ADC value of heart rate can be obtained through infrared led irradiation. The MAX30100 register can be divided into five categories: state register, FIFO, control register, temperature register, and ID register. The temperature register reads the temperature value of the chip to correct the deviation caused by the temperature. The ID register can read the chip's ID number.

https://preview.redd.it/221fq8vg30a51.jpg?width=848&format=pjpg&auto=webp&s=43e93284ac35cf1944a77d79ff9a2f662e540c7e

MAX30100 is connected with the Arduino Mini Pro development board through the IIC communication interface. Because there are ready-made MAX30100 library files in the Arduino IDE, we can read the heart rate and blood oxygen data without studying the registers of MAX30100.
For those who are interested in exploring the MAX30100 register, see the MAX30100 Datasheet.

Modify the MAX30100 IIC pull-up resistor

It should be noted that the 4.7k pull-up resistance of the IIC pin of MAX30100 module is connected to 1.8v, which is not a problem in theory. However, the communication logic level of the Arduino IIC pin is 5V, so it cannot communicate with Arduino without changing the hardware of the MAX30100 module.Direct communication is possible if the MCU is STM32 or another 3.3v logic level MCU.
Therefore, the following changes need to be made:

https://preview.redd.it/jti57usl30a51.jpg?width=521&format=pjpg&auto=webp&s=c56b1b1a8294d60a8f9e931e411305f68c5c5559
Remove the three 4.7k resistors marked in the picture with an electric soldering iron. Then weld two resistors of 4.7k at the pins of SDA and SCL to VIN, so that we can communicate with Arduino.

Arduino serial display LCD

Open the Arduino IDE and find the following buttons:

https://preview.redd.it/990d3bdp30a51.jpg?width=853&format=pjpg&auto=webp&s=24136c385601b69d5afc67842358b102373277ef
Search for "MAX30100" to find two libraries for MAX30100, then click download and install.

https://preview.redd.it/4n167pbv30a51.jpg?width=933&format=pjpg&auto=webp&s=cef50833667bae3f30ac94f5a48b43795b779845
After the installation, you can find the Demo of MAX30100 in the LIB library folder of LCD Arduino:

https://preview.redd.it/rn05xgvw30a51.jpg?width=911&format=pjpg&auto=webp&s=3709bc7c5be36ebdd14c01cb0b7c1933953425b0
Double-click the file to open it.

https://preview.redd.it/q6fqylky30a51.jpg?width=819&format=pjpg&auto=webp&s=8073917be374a72bef2977b4b11ccb2b56fa944e
This Demo can be directly tested. If the hardware connection is ok, you can download the code compilation into the Arduino development board and see the data of MAX30100 in the serial debugging tool.
The complete code is as follows: /*
Arduino-MAX30100 oximetry / heart rate integrated sensor library
Copyright (C) 2016 OXullo Intersecans
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include
#include "MAX30100_PulseOximeter.h"
#define REPORTING_PERIOD_MS 1000
// PulseOximeter is the higher level interface to the sensor
// it offers:
// * beat detection reporting
// * heart rate calculation
// * SpO2 (oxidation level) calculation
PulseOximeter pox;
uint32_t tsLastReport = 0;
// Callback (registered below) fired when a pulse is detected
void onBeatDetected()
{
Serial.println("Beat!");
}
void setup()
{
Serial.begin(115200);
Serial.print("Initializing pulse oximeter..");
// Initialize the PulseOximeter instance
// Failures are generally due to an improper I2C wiring, missing power supply
// or wrong target chip
if (!pox.begin()) {
Serial.println("FAILED");
for(;;);
} else {
Serial.println("SUCCESS");
}
// The default current for the IR LED is 50mA and it could be changed
// by uncommenting the following line. Check MAX30100_Registers.h for all the
// available options.
// pox.setIRLedCurrent(MAX30100_LED_CURR_7_6MA);
// Register a callback for the beat detection
pox.setOnBeatDetectedCallback(onBeatDetected);
}
void loop()
{
// Make sure to call update as fast as possible
pox.update();
// Asynchronously dump heart rate and oxidation levels to the serial
// For both, a value of 0 means "invalid"
if (millis() - tsLastReport > REPORTING_PERIOD_MS) {
Serial.print("Heart rate:");
Serial.print(pox.getHeartRate());
Serial.print("bpm / SpO2:");
Serial.print(pox.getSpO2());
Serial.println("%");
tsLastReport = millis();
}
}
📷
This code is very simple, I believe you can understand it at a glance. I have to say that the modular programming of Arduino is very convenient, and I don't even need to understand how the driver code of Uart and IIC is implemented.
Of course, the above code is an official Demo, and I still need to make some changes to display the data to STONE's displayer.

Display data to the STONE display through Arduino LCD

First, we need to get the address of the component that displays the heart rate and blood oxygen data in STONE's displayer:
In my project, the address is as follows:
Heart rate display component address: 0x0001
Address of blood oxygen display module: 0x0005
Sensor connection status address: 0x0008
If you need to change the display content in the corresponding space, you can change the display content by sending data to the corresponding address of the display screen through the serial port of Arduino.
The modified code is as follows:
/*
Arduino-MAX30100 oximetry / heart rate integrated sensor library
Copyright (C) 2016 OXullo Intersecans
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include
#include "MAX30100_PulseOximeter.h"
#define REPORTING_PERIOD_MS 1000
#define Heart_dis_addr 0x01
#define Sop2_dis_addr 0x05
#define connect_sta_addr 0x08
unsigned char heart_rate_send[8]= {0xA5, 0x5A, 0x05, 0x82,\
0x00, Heart_dis_addr, 0x00, 0x00};
unsigned char Sop2_send[8]= {0xA5, 0x5A, 0x05, 0x82, 0x00, \
Sop2_dis_addr, 0x00, 0x00};
unsigned char connect_sta_send[8]={0xA5, 0x5A, 0x05, 0x82, 0x00, \
connect_sta_addr,0x00, 0x00};
// PulseOximeter is the higher level interface to the sensor
// it offers:
// * beat detection reporting
// * heart rate calculation
// * SpO2 (oxidation level) calculation
PulseOximeter pox;
uint32_t tsLastReport = 0;
// Callback (registered below) fired when a pulse is detected
void onBeatDetected()
{
// Serial.println("Beat!");
}
void setup()
{
Serial.begin(115200);
// Serial.print("Initializing pulse oximeter..");
// Initialize the PulseOximeter instance
// Failures are generally due to an improper I2C wiring, missing power supply
// or wrong target chip
if (!pox.begin()) {
// Serial.println("FAILED");
// connect_sta_send[7]=0x00;
// Serial.write(connect_sta_send,8);
for(;;);
} else {
connect_sta_send[7]=0x01;
Serial.write(connect_sta_send,8);
// Serial.println("SUCCESS");
}
// The default current for the IR LED is 50mA and it could be changed
// by uncommenting the following line. Check MAX30100_Registers.h for all the
// available options.
pox.setIRLedCurrent(MAX30100_LED_CURR_7_6MA);
// Register a callback for the beat detection
pox.setOnBeatDetectedCallback(onBeatDetected);
}
void loop()
{
// Make sure to call update as fast as possible
pox.update();
// Asynchronously dump heart rate and oxidation levels to the serial
// For both, a value of 0 means "invalid"
if (millis() - tsLastReport > REPORTING_PERIOD_MS) {
// Serial.print("Heart rate:");
// Serial.print(pox.getHeartRate());
// Serial.print("bpm / SpO2:");
// Serial.print(pox.getSpO2());
// Serial.println("%");
heart_rate_send[7]=(uint32_t)pox.getHeartRate();
Serial.write(heart_rate_send,8);
Sop2_send[7]=pox.getSpO2();
Serial.write(Sop2_send,8);
tsLastReport = millis();
}
}
Compile the code, download it to the Arduino serial display LCD development board, and you're ready to start testing.
We can see that when the fingers leave the MAX30100, the heart rate and blood oxygen display 0. Place your finger on the MAX30100 collector to see your heart rate and blood oxygen levels in real-time.

LCD Arduino project effect can be seen in the following picture:


https://preview.redd.it/k9u0jtg040a51.jpg?width=510&format=pjpg&auto=webp&s=1e9994109a072807a802eb1179b874f727aeff5a
https://preview.redd.it/0ow2lfg040a51.jpg?width=576&format=pjpg&auto=webp&s=b0f5f6ac073894c8b0c033549fce79fac1c90bc3
submitted by Tamesliu to arduino [link] [comments]

[Megathread] XMG FUSION 15 (with Intel)


On September 6 at IFA, press released their first reports about our collaboration project with Intel: XMG FUSION 15.
Community Links:

Press Links:

Video Links:

The following key facts have already been revealed:
Prices and availability will be announced on September 17. → Countdown to xmg.gg
Teaser Trailer on YouTube: XMG FUSION 15 Laptop | A Design Collaboration with Intel
We look forward to your questions and your feedback!

XMG FUSION 15 - FREQUENTLY ASKED QUESTIONS (FAQ)

This FAQ represents Q&A's over the last few days here. Fellow redditor u/iterateandgit was so kind to help me putting this document together. Big shout out to him please! The FAQ will be further extended over the coming days and weeks. Please keep the questions coming!

Sales, Shipping, Warranty


Q: Are you going to sell this on Amazon in the EU?
A: We are working on getting the product up and running on Amazon. But our own BTO shop at www.bestware.com will always be our primary sales channel and will be the only one where you can customize and configure memory, storage, OS, extend your warranty and pick other options.

Q: Do you offer student discounts or other sales compaigns like black friday?
A: In general, we don't offer student discounts. Sales campaigns are planned just in time, depending on stock level and cannot be announced early. If you want to keep up to date about sales campaigns, please subscribe to our newsletter.

Q: Do you ship to the UK? Can I pay in GBP?
A: We ship to the UK - the pricing will be in EUR, so your bank will do the conversion. Warranty services will be available from UK, shipping to Germany. Currently, in the single markets, these resturn shipments are free for the end-user. In the worst case there might be additional customs fees for shipping.

Q: What warranty options do you offer?
A: All our laptops come with 2 year warranty. Warranty repairs in the first 6 months are promised to be done within 48 hours (+shipping). Both the "instant repair" service and the warranty itself can be extended to up to 3 years.

Q: Do you sell outside of Europe?
A: We are able to ship anywhere, but warranty for customers outside the region would always involve additional customs cost and paperwork for sending the laptop back to Germany in the rare event of an RMA. There is currently no agreement to let other Local OEMs (like Eluktronics in the US) carry the warranty for XMG customers and vice-versa. Some parts are customized (in our case the LCD lid and the keyboard) and it won't be easy to agree on how to share handling fees etc. - so I wouldn't expect a global warranty anytime soon.


Hardware, Specs, Thermals


Q: What is the difference between XMG FUSION 15 and other laptops based on Intel's reference design?
A: The hardware of the barebone will be identical. Other Local OEMs might use different parts for RAM and SSDs. Our branding and service/warranty options might be different. We apply our own set of performance profiles in the Control Center. This will rebalance the differentiation between Silent, Balanced and Enthusiast modes.

Q: What is the TGP of the NVIDIA RTX 2070 Max-Q?
A: Officially, it is 80W in Balanced profile and 90W in Enthusiast profile. You can toggle between these modes in real-time with a dedicated mode switch button. Inofficially, the TGP can go up to 115W in Enthusiast profile thanks to the Overboost mechanic, working in the background. However, those 115W may only be sustained until the system has reached thermal saturation, i.e. when the GPU is approaching the GPU Temperature Target of 75°C.

Q: Can I upgrade the storage and memory after I buy?
A: On storage: The laptop has two m.2 PCI-Express SSD slots. This will give you currently up to 4 TB of SSD storage. There is no 2.5" HDD slot available. Instead, the battery is enlarged to 93.48Wh. You can see pictures of the interior layouts here, here and here.
On memory: the laptop has two SO-DIMM DDR4 memory sockets. You can chose during BTO configuration, if you want to occupy both of them when you order the product. We recommend running the laptop in Dual Channel for high-performance usage.

Q: How easy is to upgrade and repair this laptop?
A: Here are the key facts:
We would give this a solid 8 out of 10 which is pretty high for such a thin&light design. The 2 remaining points are substracted for BGA CPU and GPU, which is unfortunately unavoidable in such a thin design.

Q: Does it support Windows Hello?
A: A Fingerprint-Reader is not available, but the HD webcam comes with Infrared and supports Windows Hello.

Q: Can I get a smaller, lighter charger for this laptop?
A: XMG FUSION 15 requires a 230W power adaptor to provide full performance. If you max out CPU and GPU with furmark and prime, the 230W adapter will be fully utilized.
There are currently two compatible 230W adapters. They have different dimensions but similar weight. Please refer to this comparison table:
XMG FUSION 15 Power Supply Comparsion Table (Google Drive)
Includes shop links. Will be updated with precise weight numbers in the next few days. I also included 120W, 150W and 180W in this table. They all share the same plug (5.5/2.5,, diameter, 12.5mm length). But 120W and 150W are only rated for 19V but the laptop expect 19.5V. Usually this will be compensated by tolerance but we haven't tested how a system would behave under long-term usage with such an adaptor.
In theory, 120W to 180W are enough for charing the laptop and for browsing/web/media. Even a full CPU stress test could easily be handled. But as soon as you use CPU and GPU together, you'll run into the bottleneck and your performance will be reduced.
Comparison pictures:
These 5 pictures show only the relevant 230W chargers.
Again, the weight is about the same.

Q: Is it possible to boot and run the laptop while the lid is kept closed?
A: Closing the lid under load is not recommended because it will limit the airflow and have a bad effect on keyboard and screen. The laptop likes to take air in from the keycaps. With lid closed, the performance might be limited due to reaching temp targets earlier.

Q: Can I get the laptop without the XMG logo? I will be using it in public presentations and I would not like any brand names visible.
A: We cannot ship without XMG logo, but you can use a dbrand skins to cover our logo. We have not yet decided if we want to invest into integrating XMG FUSION 15 into the dbrand shop. But you can already buy 100% compatible skins by using the page of the Eluktronics MAG-15 at dbrand. The chassis dimensions are exactly the same. Please be aware: you have to manually select the option "No Logo Cutout" if you want to buy these skins for your XMG FUSION 15. According to dbrand, there will be most likely no import fees when ordering from the EU as long as the order is below 100€. Check this thread for details.

Q: Will you offer thermal paste upgrades like Thermal Grizzly Kryonaut or Liquid Metal?
A: Our ODMs are using silicon-based, high-performance thermal compund from international manufacturers like Shin-Etsu (Japan) and M.G. (USA). Intel is using MG-860 in this reference design.
These products are used in the industrial sector, so they have no publicly known brand name. Nevertheless, their high thermal conductivity and guaranteed durability provide optimal and long-lasting cooling of your high-performance laptop. The thermal compounds are applied and sealed automatically by the vendor of the thermal components. They are applied in a highly controlled, standardized manner and provide the best balance of thermal performance, production tolerance and product lifetime.
We are considering offering an upgrade to Thermal Grizzly Kryonaut due to popular demand. Will keep you posted on that.

Q: Could you please provide an estimate for how much regular usage (~10 browser tabs + some IDE) battery backup would this have? Will there be any way to trade-off battery backup with performance?
A: Battery life vs. peak performance can be traded off by using the "Silent" performance profile. You can switch between profiles using a dedicated button on the machine. Your scenario (10 tabs + some IDE) sounds like mostly reading and writing. I would estimate to get at least 7 hours of solid battery life in such a scenario, maybe more. We have achieved 8 hours in 1080p Youtube streaming on WiFi with 50% screen brightness. Adblock and NoScript helps to keep your idle browser tabs in check.


I/O Ports, Peripherals


Q: Why are there not more USB-A 3.1 Gen2 or even USB 3.2 Gen2x2 ports?
A: USB-A 3.1 Gen1 is basically the same as USB 3.0. There aren't a lot of USB-A devices that support more than USB 3.0 speed. Faster devices typically use USB-C connectors and can be used on Thunderbolt 3, which is down-compatible to USB-C 3.1 Gen2. One of the USB-A ports actually supports Gen2 speed.
For the following remarks, please keep in mind that I am not an Intel rep, so everything is based on our own experience.
The mainboard design and the I/O port decisions have been made by Intel. Feedback and requests from LOEM customers have been taken into consideration. We would assume that USB 3.2. Gen2x2 (20 Gbit/s) was not considered to be important enough to safe space for 3rd party IC (integrated circuits) on the motherboard. Right now, all the USB ports and Thunderbolts are supplied by Intel's own IC, so they have full control over the hardware, firmware and driver stack and over power saving and performance control. The more IC you add, the higher your Idle power consumption will be, plus adding potential compatibility or speed issues as it often happens with 1st generation 3rd party USB implementations. I very well remember from my own experience the support stories during the first years of USB 3.0, before it was supported in the Intel chipset. On the one hand, Intel is aiming high in terms of performance and convenience, on the other hand: support and reliability still seem to be Intel's goal #1. Thus they seem to play it safe where they deem it to be reasonable.
Intel is gearing up for USB 4.0 and next-gen Thunderbolt. USB 3.2 2x2 is probably treated as little more than a roadmap accident. Peripheral vendors might see it the same way.

Q: Do you support charging over USB-C/Thunderbolt? Does it support docking stations?
A: The Thunderbolt 3 port in Intel's reference design does not support charging. As you probably know, the 100W limit would not be enough to power the whole system and it would make the mainboard more complex to combine two different ways of charging. Intel consciously opted against it and will probably do so again on future high-end gaming/studio models.
The USB-C/Thunderbolt port supports Dual-Link DisplayPort signals, directly connected to the NVIDIA Graphics. This makes proper docking station usage very convenient. The user still needs to connect the external power adaptor. Both ports (Thunderbolt and DC-in) are in the back of the laptop, making the whole setup appear very neat on the desk.

Q: How many PCIe lanes does the Thunderbolt 3 provide? Are they connected to CPU or Chipset?
A: XMG FUSION 15 supports Thunderbolt 3 with 4 lanes of PCIe 3.0. The lanes come from the chipset because all of the CPU lanes (x16) are fully occupied by the dedicated NVIDIA graphics. We are not aware of any side-effects of running Thunderbolt from the chipset. It is common practice for high-end laptops with high-end graphics. The Thunderbolt solution is of course fully validated and certified by Intel's Thunderbolt labs.

Q: Does it have a standby USB to power USB devices without turning on the laptop?
A: Yes, the USB-A port on the left side supports this feature.


LCD Screen


Q: Which LCD panel is being used? Are there plans for 1440p or 4K panels in the laptop? How about PWM flickering?
A: The panel is BOE NV156FHM-N4G. It is currently not known if the panel will change in later batches. This depends on logistics and stock. At any rate, the panel key specs will remain the same. There are currently no plans to offer resolutions above FHD in the current generation of this laptop.
There are very wide ranges on reports of Backlight Brightness PWM control on this panel in different laptops. Ranging from 200Hz to 1000Hz to no PWM at all - all on the same panel model number. Intel informs us that there are many factors (e.g. freq., display driver, BIOS settings implementation, type of dimmers & compatibility with the driver etc.) that impacts the quality of panel dimming performance. To Intel's knowledge, no kind of flickering has been reported during the validation process. Furthermore, first hands-on data from Notebookcheck indicates that no PWM occurs on this panel. With a DSLR test (multiple burst shots at 1/4000s exposure time) I can confirm that there is not a single frame of brightness dipping or black screen, not even at minimum LCD brightness. Hence, we can confirm: BOE NV156FHM-N4G in XMG FUSION 15 (with Intel) does not use PWM for backlight control.

Q: Some BTO shops, for an additional fee, manually pick out display panels with the least back-light bleed. Do you offer that? Even better, do you do that without the extra fee?
A: Intel has validated this design to avoid backlight bleed as much as possible. Currently no plans to do further binning. All dozens of MP samples we have seen so far have been exceptionally good.

Q: I'm coming from a 13" MacBook with Retina display. How am I going to fare with this 15.6" FHD screen in content creation?
A: If you got used to editing high-res visual content (photography, artwork) on your 13inch retina, things will change. On the one hand, your canvas will be larger and more convenient and ergonomic to work with. On the other hand, you will find yourself zooming in more often in order to make out fine-detail. Assuming that you have sharp 20:20 vision.
As it is, the screen resolution and specs are not planned to change within the lifetime of this product. The first realistic time-window for a refresh would be whenever Intel is releasing the next "H" series CPU generation. But even then, an upgrade on resolution will not be guaranteed.
Comparison:
Laptop Resolution Pixel per inch dot pitch
13.3" MacBook Pro Retina (late 2013) 2560x1600 226.98 PPI 0.1119mm
15.6" XMG FUSION 15 (late 2019) 1920x1080 141.21 PPI 0.1799mm
To compare: 141.21 is ~62% from 226.98. This represents the the metric difference in pixel density and peak sharpness between these two models.
If you know the diagonal size and resolution of your screen, you can make this comparison yourself with the DPI/PPI calculator.


Keyboard, Backlight, Switches, Layout


Q: What can you tell us about the mechanical keyboard of XMG FUSION 15?
A: The keyboard has already been reviewed in our XMG NEO series as being more crisp than typical membrane keyboards. Most reviewers attested it a very good score, both for gaming and for writing long texts.
The keyboard backlight can be configured per-key. Default mode is all white.
Keyboard Switch Specs:
Having no frame around the keycaps actually helps the thermals. The fans can pull in additional air from the top. This improves airflow and helps to keep the keyboard temperature at low levels during gaming. It also prevents long-term RMA issues on the keyboard. This specific keyboard switch is already in its 3rd generation and very mature by now.

Q: Is it possible to dampen the mechanical keyboard with o-rings?
A: The switch design does not lend itself to further dampening. The switch mechanic is too complex and has more moving parts than cherry. The 2mm travel distance also plays a role in not allowing more dampening.
For reference, please use this video (Youtube). We compared XMG NEO with another membrane-type keyboard. XMG NEO and FUSION share the same keyboard mechanics with the silent tactile switch and the same sound profile.

Q: Do you have LED keyboard backlight on the secondary key function, like Fn key icons?
A: Please have a look at this picture.
Btw, my working sample has blank keycaps. I took the 3 printed keycaps (F8, F9, F10) from a different sample just to demonstrate the Fn lighting for this picture.
Facts:
In my assesment, the Fn function symbols are clearly visible from the backlight in a dark room. A user should have no difficulty to recognize the icon and reach its function.

Q: Which keyboard layouts do you offer in the EU?
A: The following layouts are available, in alphabetic order: Belgium, Czech, Danish, Dvorak German, Dvorak US, Estonia, French, German, Greek, Italian, Norwegian, Polish for Typists, Portuguese, Russia Latin, Slovakish, Spanish, Swedish / Finnish, Swiss, Turkish, UK, US International (ISO)All these layouts are based on the ISO matrix. See differences between ANSI vs. ISO here.


Operating System


Q: Do you support Linux and dual-boot on XMG FUSION 15?
A: We are in discussion to sell XMG FUSION 15 over Tuxedo with official Linux support. It might take 1 or 2 months to get this running.

Q: Which LAN, Audio and WiFi card vendors will be used? Asking for a friend.
A: From our HWiNFO64 report. (Google Drive link)
LAN: RealTek Semiconductor RTL8168/8111 [PCI\VEN_10EC&DEV_8168&SUBSYS_20868086&REV_15]Audio: Intel(R) Smart Sound Technology (Intel(R) SST) Audio Controller [PCI\VEN_8086&DEV_A348&SUBSYS_20868086&REV_10]WiFi: Intel(R) Wi-Fi 6 AX200 [PCI\VEN_8086&DEV_2723&SUBSYS_00848086&REV_1A], can be replaced.
For more information, please check the linked report file.


Other questions


Q: What would you say are the advantages and differences with other laptops due to the fact the laptop was designed in collaboration with Intel?
A: Disclaimer: I am \not* an Intel rep. The following remarks are based on my personal experience and opinion.*
Advantages:
  1. Very strict quality control on all levels. I can't quote numbers due to NDA, but Intel NUC has extremely low RMA rates, compared to average PC mainboards and systems. Intel is driven by strict internal regulation that strifes for perfection - this applies to the whole chassis, assembly and firmware, not only the mainboard. There are also certain regulations in place, for example in terms of electro-magnetic regulation and skin temperatures. The rating label is littered with regulatory seals from every region of the world, making this laptop especially safe to use.
  2. Access to high-quality material: we have not seen any Gaming Laptops based on Magnesium alloy yet, especially not in the ODM/LOEM ecosystem. The battery cells are also much more dense than what we usually see. Intel has the buying power and the vision to not settle for mediocre parts.
  3. Down-to-earth design: Intel has made this reference design for the ODM/LOEM eco-system. The design does not try to follow any specific corporate identity, thus it does not have any unneccessary "bling bling" like all the others have. Even the Razer Blade with it's sleek shape is quite obnoxious (iny my oppinion) with it's big backlit green snake logo. With XMG FUSION however, we can continue our typical style of "Undercover Gaming".
  4. Security: you can expect stellar support in terms of BIOS and Firmware (TPM, Management Engine) updates whenever any security issues are found. This might also apply to global brands, but ODM/LOEM systems have not always been so quick to react. This is due to the huge fragmentation/customizations in ODM/LOEM systems. Intel however does now allow any fragmentation: every LOEM partner is getting the same firmware. There are many hooks for configurations in this firmware, but the source code / binaries are always the same. This makes support much easier down the line.
Disadvantages:
  1. I can't name many, of course. But I would say the strict validation also makes the partnership less flexible from a product management perspective. There is no plan currently to phase-in any 4K or 300Hz screen (FHD/144Hz ought to be enough for everyone this year) or any Core i9 in this system. Other ODMs might be more open for costly modifications based on low quantities. Intel however has streamlined their production and logistics in a way that gives us (the LOEM) very short lead times and competitive pricing, but will not allow any short-notice upgrades or customizations.

Q: Will there be a 17 inch version?
A: We can neither confirm nor deny plans for a 17 inch version at this point.


[to be continued]
submitted by XMG_gg to XMG_gg [link] [comments]

IQ Option Robot Signal CROSS PRO - Beginer Winning ... Secret ║ binary options pro signals login - YouTube Free Binary Options Live Stream Signal App ️ 100% Accuracy ... NEW STRATEGY ║ binary options pro signals free group - YouTube Binary Options Pro Signals Review  It's Really Work For ... Best Binary Options Strategy 2020 - 2 Minute Strategy LIVE ... Free Signals $ binary options pro signals recommended ... Binary Options Pro signals Review - Buyer Review - YouTube Price Action Binary Options Signals That Work - YouTube NEW 100% WIN BINARY OPTION FREE TRADING SIGNALS - YouTube

Binary options signals are alerts that are used to trade binary options contracts, which have been derived after analysis of the underlying asset to be traded. When compared with its forex counterparts, binary signals are still at an early stage. But as the number of traders increases, and newer software applications and tools are developed, we will begin to see increased usage of signals for ... With Binary Options Pro Signals you can make up to 88% per trade without complicated Formulas or Systems or Robots. Binary Options are for ANYONE who wants to start making real money even if you’ve never made a trade in your life. Binary Options are limited risk contracts based on a simple YES/NO market proposition. For example, will the markets go up by the end of the hour. Binary Options ... There is a plethora of systems out there such as binary options pro signals, auto binary signals, Optionbot, and Winning Binary Signals. Some are free, while others will charge you a monthly fee and allow you to partner with a broker of your choosing. If you are new to options trading you must first understand why signals have become so popular among traders. To illustrate, if you are just ... About. Am a full time binary options trader,i do manage account for individuals/corporate and generate Daily/weekly profit, i can help manage your live trading account to make a formidable profit ... BinaryOptionsProSignals.com Best Rated Signals for Binary Options . Le seul titre est une information de données et n’affecte pas la cote de sécurité de ce site web. Sécurité . Web Of Trust . 1.3888888888889 Fiabilité . Impact élevé. 1% . Fiabilité, calculée avec une confiance de 14%. Attention ! le site binaryoptionsprosignals.com est très peu fiable selon WOT. 1.3888888888889 ... Binary Options Pro Signals is a fully automated trading system that claims it can accurately predict trading signals and earn users thousands of dollars within just minutes of activating their account. There is a 14-day trial offered for this system, however, you will be charged $14. After this time, should you continue to use the service, you will be charged $97 a month. BinaryOptionsProSignals.com Best Rated Signals for Binary Options . El título solo es un dato de información y no afecta en la puntuación de seguridad de este sitio web. Seguridad . Web Of Trust . 1.3888888888889 Fiabilidad . Impacto alto. 1% . Fiabilidad calculada con una confianza del 14% ¡Atención! el sitio web binaryoptionsprosignals.com es muy poco fiable según WOT. 1 ... FXProSystems.com is a Portal for Traders with a variety of trading tools (Forex and Binary Options Indicators, Trading Systems and Strategies for different trading styles, and also Expert Advisors) that can be downloaded absolutely free. On the website FXProSystems.com contains Indicators and Trading Systems for Forex and Binary Options. We regularly supplement our collection of trading tools ... Answer: Auto Binary Signals (ABS) is the #1 binary options trading solution, it filters through thousands of potential market opportunities in real time and only alerts you when the predicted probability of success is at least over 80%.It generates trading signals based on a sophisticated strategy using numerous indicators and rules, depending on higher or lower success rate of these ... Pro Signal Robot does not advertise binary options for anyone and does not invite anyone to join binary options trading. Pro Signal Robot has developed software to help traders to execute and monitor trades. Pro Signal Robot is not affiliated, endorsed, or sponsored by any binary options brokers. Also, we do not provide brokerage or trading services. The signals made by our software are based ...

[index] [27500] [13562] [16901] [11456] [729] [13665] [14452] [4155] [28419] [23743]

IQ Option Robot Signal CROSS PRO - Beginer Winning ...

Hello everyone!:) My name is Anastasia, but it's too hard to pronounce, that's why you may call me just ANA. I'm a pro trader for more than 2 years already a... One minute strategy to trade price action trading signals. Watch how I use simple trading rules to increase win rate. Get 10x Trading System: https://trading... inary Options Pro Signals Review http://tinyurl.com/ovavan5 Gett-Here? DOWNLOAD –Binary Options Signals SCAM? Do NOT Buy Binary Options Pro Signals before yo... Hello everyone!:) My name is Anastasia, but it's too hard to pronounce, that's why you may call me just ANA. I'm a pro trader for more than 2 years already a... Best Binary Options Brokers for this Strategy: 1. 💲💹IQ Option FREE DEMO: http://www.cryptobinarylivingway.com/IQOption1 2. 💲💹Pocket Option FREE DEMO: http http://tiny.cc/6437xw - Start making serious money with live trading signals Hello everyone!:) My name is Anastasia, but it's too hard to pronounce, that's why you may call me just ANA. I'm a pro trader for more than 2 years already a... 👉 Free Forex And Binary Options Live Signal https://bit.ly/3cIsicC 👉👉👉This Live Signal Works Only Below 2 Broker👇👇👇 Reliable Binary Options Broker with a ... Bot Cross Bot Download: https://bit.ly/crossbot-iqoption Store Binary Bot : https://robotbinarysignals.ecwid.com/ Free Signals : https://bit.ly/signalbinaryo... Do not miss! DEMO ACCOUNT: https://bit.ly/2Lq3NUt You can use this strategy in binary options to win every time but you have to keep following things in mind...

https://binaryoptiontrade.arimanpo.tk